TP-Link TL-ER6120 manual ¾ List of Logs, ¾ Config

Get GMT:		When this option is selected, you can configure the time zone and the
		IP Address for the NTP Server. The Router will get GMT automatically
		if it has connected to a NTP Server.
		z Time Zone: Select your local time.
		z Primary/Secondary NTP Server: Enter the IP Address for the NTP
		Server.
Manual:		With this option selected, you can set the date and time manually.
Synchronize	with	With this option selected, the administrator PC’s clock is utilized.
PC’S Clock:

Note:

1.If the Get GMT function cannot be used properly, please add an entry with UDP port of 123 to the firewall software of the PC.

2.The time will be lost when the Router is restarted. The Router will obtain GMT time automatically from Internet.

3.7.7Logs

The Log system of Router can record, classify and manage the system information effectively.

Choose the menu Maintenance→Logs→Logs to load the following page.

Figure 3-89 Logs

¾List of Logs

List of Logs displays the system log information in log buffer. An entry of log contains the following four parts:

¾Config

Enable Auto-refresh:With this option selected, the page will refresh automatically every 5

seconds.

Severity:Displays the severity level of the log information. You can select a severity level to display the log information with the same level.

-126-