TL-MR3040 Portable 3G/3.75G Battery Powered Wireless N Router
TL-MR3040 is used to extend the range of wireless signal of the existing AP or wireless router.
In this mode, the only wired port works as LAN. Computer could connect to the device by either
wired or wireless way. The SSID of TL-MR3040should be the same as that of the device you
repeat. To avoid the conflict of DHCP service with front-end devices, the DHCP server is default
to be closed in this mode. If you want to log in the management page, please set your
computer’s IP address manually.
¾ Bridge with AP
TL-MR3040 in Bridge mode is used to extend the range of wireless signal of the existing AP or
wireless router.
In this mode, the only wired port works as LAN. Computer could connect to the device by either
wired or wireless way. To avoid the conflict of DHCP service with front-end devices, the DHCP
server is default to be closed on this mode. If you want to log in the management page, please
set your computer’s IP address manually.
-8-