TL-MR3040 Portable 3G/3.75G Battery Powered Wireless N Router
default SSID is set to be TP-LINK_POCKET_3040_xxxxxx (xxxxxx indicates the
last unique six characters of each Router's MAC address), which can ensure your
wireless network security. But it is recommended strongly that you change your
networks name (SSID) to a different value. This value is case-sensitive. For
example, MYSSID is NOT the same as MySsid.
z Region - Select your region from the pull-down list. This field specifies the region
where the wireless function of the Router can be used. It may be illegal to use the
wireless function of the Router in a region other than one of those specified in this
filed. If your country or region is not listed, please contact your local government
agency for assistance.
z Channel - This field determines which operating frequency will be used. It is not
necessary to change the wireless channel unless you notice interference
problems with another nearby access point. If you select auto, then the AP will
select the best channel automatically.
z Security Mode – Please refer to the Appendix C: Security Mode.
¾ If you choose Repeater, the next screen will appear as shown in Figure 3-18. In
Repeater mode, the AP with WDS disabled will relays data to an associated root AP. AP
function is enabled meanwhile. The wireless repeater relays signal between its stations
and the root AP for greater wireless range. Please input the MAC address of root AP in
the field "MAC Address".
Figure 3-18 Quick Setup – Repeater
-18-