TP-Link TL-MR7HN appendix Physical Description

Quick Installation Guide

150Mbps Wireless N Mini Pocket Router - Advanced Edition

MODEL NO. TL-WR710N

Package Contents

TL-WR710N Ethernet Cable

REV1.0.0
	Resource CD for User Guide Only	QIG
7106504219

Physical Description

Before hardware connection, please write down the						TL-WR710N LED Guide:
Wireless Password and SSID found on the label of your
							LED				Status
TL-WR710N. Both are case-sensitive.
							Solid Blue				The device is working properly.
							Blinking				System is booting.
											The Ethernet Cable or USB Device is
											connecting to the product.
	.CQT JSFMFTT / .JOJ 1PDLFU 3PVUFS
		"EWBODFE &EJUJPO	Model:TL-WR710N(US) Ver:1.0
	1PXFS 7_ )[ "		S/N:XXXXXXXXXXXX
			MAC:B0487A663D6C
			Wireless Password/PIN:12345678						USB	Reset LAN/WAN LAN
			SSID:TP-LINK_663D6C
				Model:TL-WR710N(US) Ver:1.0
						USB：Connect a USB Flash drive or External Hard Drive for file
				S/N:XXXXXXXXXXXX
						sharing. It can also be used as a charging station for mobile devices.
					MAC:B0487A663D6C	Reset：Resets the TL-WR710N to factory default settings.
						LAN/WAN: Must use this port to connect to your Modem while in Router
				Wireless Password/PIN:12345678
				SSID:TP-LINK_663D6C		mode. For all other modes, use it as an additional LAN port.
						LAN: Connect your ethernet enabled devices for wired network access.
						In client mode, use it to give wireless access to a wired-only device. In
						access point mode, use it to receive network access from your local
						network.
	Wireless Password/PIN: Default Password							For more detailed information about Reset, please refer to
								Appendix: Troubleshooting.
	SSID: Default Network Name

Operating Modes

1 Wireless Router Mode (Default) 2 Client Mode 3 Repeater Mode 4 Access Point Mode 5 WISP Client Router Mode

Create an instant password-protected wireless network with an NAT Firewall and share internet with multiple devices. This mode is suitable for hotel rooms and home networks.

(Note: if the hotel’s Internet has an authentication process, you will need to authenticate only once and only on one device)

Protected by NAT Firewall

Wired Ethernet

Connection

Use as a wireless adapter for wired-only Ethernet enabled devices. This mode is suitable for connecting Smart TVs, game consoles, or computers to your wireless network.

Repeat signal from an existing wireless network. This mode is suitable to extend wireless coverage, reaching devices that were previously too far from your primary router to maintain a stable wireless connection.

The repeated signal will display the same network name and password as your existing wireless network.

Create a wireless network from an Ethernet	Use as a client router to receive internet access
connection. This mode is suitable for dorm rooms	from a Wireless Internet Service Provider (WISP),
or homes if there's already a wired router but you	and share that access with local devices.
need a wireless hotspot.
(Note: if the hotel’s Internet has an authentication
process, you will need to authenticate it on EACH

device.)

def

Wired Ethernet

Connection

Instant Wireless Connection

The examples illustrated below are from Windows 7. If you are using a different Windows, or a Mac Operating System, your screenshots may look different, but the procedure is the same.

1 Plug the TL-WR710N into a power outlet that is	2 If you are connecting the TL-WR710N directly to
near your modem or a wired ethernet connection.	your cable modem, you must first power reset the
Wait until the LED is blinking.	modem and wait until its ONLINE LED is solid.
	Then use an ethernet cable to connect to your
	modem via the LAN/WAN port on the TL-WR710N.
	If you are connecting the TL-WR710N to an existing
	network, simply plug the ethernet cable into the
	LAN/WAN port and to your network.
	In either case, wait until the LED is solid blue.

USB LAN

Wired Ethernet

Connection

eset LAN/WAN

3 Click the Wireless Network icon on your desktop					4	Enter the Default Password, then click OK or	5 Congratulations! You have successfully
(			or	). Select the Default SSID of the		Next.	connected to your network!
	TL-WR710N, then click Connect.
		Not Connected						Currently connected to:
				Connections are available				TP-LINK_XXXXXX
								Internet access
								Wireless Network Connection
		Wireless Network Connection

TP-LINK_ XXXXXX		TP-LINK_XXXXXX	Connected
Connect automatically	Connect	TP-LINK_Home
TP-LINK_Home		TP-LINK_Guest
TP-LINK_Guest		TP-LINK_Neighbor

TP-LINK_Neighbor	Free Public WiFi
Free Public WiFi
	Open Network and Sharing Center

Open Network and Sharing Center

Customizing your Wireless Network Name & Password (Optional)

1 Open a web browser and go to the page	2 To customise your Wireless Network Name Click	3	In the “Wireless Network Name” box, type in	4 To customise your Wireless Password, click
http://tplinklogin.net.	on “Wireless” from the menu on the left.		your new Wireless Name. Then click “Save”.	“Wireless” from the menu on the left, then click

“Wireless Security”.

5In the “Wireless Password” box under “WPA/WPA2 - Personal (Recommended)” type in your new wireless Password. Then click “Save”.

http://tplinklogin.net

		Status
Enter the login username: admin and		Quick Setup	Status
		WPS
password: admin.		Working Mode
		Network
		Wireless
		DHCP
	admin	USB Settings	LAN
		Forwarding
		Security
		Parental Control
		Access Control
		Advanced Routing	Wireless
		Bandwidth Control
		IP & MAC Binding
		Dynamic DNS
		System Tools

Wireless Settings

Wireless Network Name:		(Also called the SSID)
	INSERT CUSTOM SSID HERE
Region:
	United States
Warning:	Ensure you select a correct country to conform local law.
	Incorrect settings may cause interference.
Mode:
	11bgn mixed
Channel Width:	Auto
Channel:	Auto

Enable Wireless Router Radio

Enable SSID Broadcast

Enable WDS Bridging

Save

Status
Quick Setup	Wireless Set
WPS
Working Mode
Network	Wireless Ne
Wireless

-Wireless Settings

-Wireless Security

-Wireless MAC Filtering

- Wireless Advanced	Ch
- Wireless Statistics
DHCP
USB Settings
Forwarding
Security
Parental Control
Access Control
Advanced Routing
Bandwidth Control
IP & MAC Binding
Dynamic DNS
System Tools

Wireless Settings

Disable Security

WPA/WPA2 - Personal (Recommended)

Version:	WPA2-PSK
Encryption:	AES
Wireless Password:	INSERT CUSTOM PASSWORD HERE
	(You can enter ASCII characters between 8		and 63 or Hexdecimal
Group Update Key Period:		Seconds (Keep it default if you are not sure, m

WPA/WPA2 - Enterprise

Version:	Automatic
Encryption:	Automatic
Radius Server IP:
Radius Port:	1812	(1-65535, 0 stands for default port 1812)
Radius Password:
Group Update Key Period:	0		(In seconds, minimum is 30, 0 means no upda

WEP

Type:	Automatic
WEP Key Format:	Hexadecimal
Key Selected:	WEP Key	Key Type
Key 1:		Disabled
Key 2:		Disabled
Key 3:		Disabled
Key 4:		Disabled

Save