TP-Link TL-MR7HN Operating Mode Configuration, Appendix 1 USB Features, Appendix 2 Repeater Mode

Operating Mode Configuration

1Plug your TL-WR710N into a power outlet and use its LAN port to connect your computer via Ethernet cable. Disconnect from all wireless networks, and wait until the LED is solid blue.

USB Reset LAN/WAN

AN LAN

Wireless Router Mode

1Choose your WAN Connection Type:

If you don't know your connection type, you may select “Auto-Detect”. Before continuing, you must be connected to your existing network or modem via the LAN/WAN Port.

If you select PPPoE, then enter the User Name and Password given to you by your ISP, and click “Next”.

If you select Dynamic IP, click “Next” and continue to step 2.

If you select Static IP, then enter the IP Address and Subnet Mask given to you by your ISP, and click “Next”.

Quick Setup - WAN Connection Type

Start >> Working Mode >> WAN Connection Type >> Wireless >> Finish

The Quick Setup is preparing to set up your connection type of WAN port.

The Router will try to detect the internet connection type your ISP provides if you select the Auto-Detect option.

Otherwise, you will need to specify the connection type manually.

Auto-Detect- Let the Router automatically detect the connection type your ISP provides.

PPPoE - Usually for ADSL Modem and you will need a PPPoE username and password from your ISP.

Dynamic IP - Usually for Cable Modem and the router will automatically obtain an IP address from the DHCP server.

Static IP - This type of connection uses a permenant, fixed (static) IP address that your ISP assigned.

Back Next

2Open a web browser and go to the page http://tplinklogin.net.

http://tplinklogin.net

Enter the login username: admin and password: admin.

admin

The login username and password are case sensitive.

2Set your wireless parameters. If desired, you may change your Wireless Network Name, Wireless Security Mode, or Password. Click “Next” and then “Reboot”.

Quick Setup - Wireless

Start >> Working Mode >> WAN Connection Type >> Wireless >> Finish

	Wireless Radio:	Disable
Wireless Network Name:		INSERT CUSTOM SSID HERE		(Also called the SSID)
	Region:	United States
	Warning:	Ensure you select a correct country to conform local law.
		Incorrect settings may cause interference.
	Mode:
		11bgn mixed
	Channel Width:	Auto
	Channel:	Auto
Wireless Security:
		Disable Security
		WPA-PSK/WPA2-PSK
	PSK Password:	INSERT CUSTOM PASSWORD HERE
		(You can enter ASCII characters between 8 and			63 or Hexadecimal characters betwee
		No Change
		Back	Next

After the rebooting, reconnect to the network according to “Instant Wireless Connection”.

3	After a successful login, click “Quick Setup” from the menu to				4	Choose the Working Mode you need, then click “Next” and refer to
	configure your TL-WR710N. Click “Next”.					the sections below for further instruction.
							Working Mode
							Start >> Working Mode >> Wireless >> Finish
							Wireless Router
		Status					Access Point
		Quick Setup	Quick Setup				Repeater
		WPS
							Client
		Working Mode
		Network	The quick setup will tell you how to configure the basic network parameters.				WISP Client Router
		Wireless	To continue, please click the Next button.
		DHCP	To exit, please click the Exit button.				Back	Next
		USB Settings
		Forwarding
		Security	Exit	Next
		Parental Control
		Access Control
		Advanced Routing

Bandwidth Control

IP & MAC Binding

Dynamic DNS

System Tools

Repeater/Client Mode The examples illustrated below are from Repeater Mode, but the procedure is similar for Client Mode.

1	Click “Survey” button to find the available wireless networks.				2	The target network‘s SSID will be automatically filled into the
	Then select the SSID of your target network and click					wireless setting page. Select the Security Mode and enter the
	“Connect”.
						Password. Then click “Next“.
		Quick Setup - Wireless					Quick Setup - Wireless
		Start >> Working Mode >> Wireless >> Finish
							Start >> Working Mode >> Wireless >> Finish
		Repeater Mode Setting:					Repeater Mode Setting:
		Repeater Mode:	Universal Repeater WDS Repeater					Repeater Mode:	Universal Repeater	WDS Repeater
		Wireless Name of Root AP:		(Also called the SSID)				Wireless Name of Root AP:	TP-LINK_Network		(Also called the SSID)
		MAC Address of Root AP:						MAC Address of Root AP:	94-0C-6D-2F-3C-BE
			Survey						Survey
			You can click the Survey Button to scan the network SSIDs,						You can click the Survey Button to scan the network SSIDs,
			and then choose the target one to setup the connection.
									and then choose the target one to setup the connection.
		Region:	United States					Region:	United States
		Warning:	Ensure you select a correct country to conform local law.
			Incorrect settings may cause interference.					Warning:	Ensure you select a correct country to conform local law.
									Incorrect settings may cause interference.
		Wireless Security Mode:	No Security					Wireless Security Mode:	Most Secure (WPA-PSK/WPA2-PSK)

All security settings, for example the wireless password should match the Root AP.

If you choose No Security mode, the wireless stations will be able to connect		Wireless Password:	All security settings, for example the wireless password should match the Root AP.
			1234567890
the AP without encryption. It is recommended strongly that you choose one of
			If you choose No Security mode, the wireless stations will be able to connect
following options to enable security.
			the AP without encryption. It is recommended strongly that you choose one of
			following options to enable security.
Back	Next
			Back	Next

After the rebooting, reconnect to the network according to “Instant Wireless Connection”.

Access Point Mode

1Set your wireless parameters. If desired, you may change your Wireless Network Name, Wireless Security Mode, or Password. Click “Next” and then “Reboot”.

Quick Setup - Wireless

Start >> Working Mode >> Wireless >> Finish

AP Mode setting:

Wireless Network Name:		(Also called the SSID)
	INSERT CUSTOM SSID HERE
Region:	United States
Warning:	Ensure you select a correct country to conform local law.
	Incorrect settings may cause interference.
Channel:	Auto
Mode:	11bgn mixed
Channel Width:	Auto
Wireless Security Mode:	Most Secure (WPA/WPA2-PSK)
Wireless Password:	INSERT CUSTOM PASSWORD HERE

(You can enter ASCII or Hexdecimal characters. For hexdecimal, the length should be between 8 and 64 characters; for ASCII, the length should be between 8 and 63 characters. For good security it should be of ample length and should not be a commonly known phrase.

Back Next

After the rebooting, reconnect to the network according to “Instant Wireless Connection”.

WISP Client Router Mode

1 Choose your WAN Connection Type:					2 Click “Survey” button to find the available wireless networks.
	If you select PPPoE, then enter the User Name and Password				Then select the SSID of your target network and click “Connect”.
	given to you by your ISP, and click “Next”.
						Quick Setup - Wireless
	If you select Dynamic IP, click “Next” and continue to step 2.					Start >> Working Mode >> WAN Connection Type >> Wireless >> Finish
						Client Setting
	If you select Static IP, then enter the IP Address and Subnet					SSID:	INSERT CUSTOM SSID HERE
	Mask given to you by your ISP, and click “Next”.					BSSID:			Example: 00-1D-0F-11-22-33
							Survey
						Key Type:	WPA-PSK/WPA2-PSK
	Quick Setup - WAN Connection Type					WEP Index:	1
						Auth Type:	open
		Start >> Working Mode >> WAN Connection Type >> Wireless >> Finish				Password:
		The Quick Setup is preparing to set up your connection type of WAN port.				AP Setting
						Local SSID:
		PPPoE - Usually	for ADSL Modem and you will need a PPPoE username and password from your ISP.			Wireless Security Mode:	Most Secure (WPA/WPA2-PSK)
		Dynamic IP - Usually for Cable Modem and the router will automatically obtain an IP address from the DHCP server.				Wireless Password:
							(You can enter ASCII or Hexdecimal characters. For hexdecimal, the length should
		Static IP - This type of connection uses a permenant, fixed (static) IP address that your ISP assigned.
							be between 8 and 64 characters; for ASCII, the length should be between 8 and 63
							characters. For good security it should be of ample length and should not be a
							commonly known phrase.
			Back	Next			Back	Next

3The target network’s SSID and BSSID will automatically fill the relevent wireless setting boxes. Select the Key type and enter the Password. Click “Next” and then “Reboot”.

Quick Setup - Wireless

Start >> Working Mode >> WAN Connection Type >> Wireless >> Finish

Client Setting

	SSID:		TP-LINK_Network
	BSSID:		94-0C-6D-2F-3C-BE	Example: 00-1D-0F-11-22-33
			Survey
	Key Type:		WPA-PSK/WPA2-PSK
	WEP Index:	1
	Auth Type:		open
	Password:	1234567890
AP Setting
	Local SSID:
			TP-LINK_2046F2
Wireless Security Mode:			Most Secure (WPA/WPA2-PSK)
Wireless Password:		1234567890

(You can enter ASCII or Hexdecimal characters. For hexdecimal, the length should be between 8 and 64 characters; for ASCII, the length should be between 8 and 63 characters. For good security it should be of ample length and should not be a commonly known phrase.

Back Next

Afterr ththe rebooting,booting, reconnectct toto ththe networktwork acaccording to “Instant Wireless Connection”.

Appendix 1: USB Features

Storage Sharing and Media Server

The USB port on the TL-WR710N can be used to share files, media, and local storage space across your network.

USB Reset LAN/WAN LAN

USB Res

Local Storage Sharing Media Sharing

Scan the QR code to access the Application

Guide for USB features on

http://www.tp-link.com/app/usb

You can also use the USB port to charge your phone or tablet!

For more detailed information about USB features, you may refer to the User Guide on the Resource CD.

Appendix 2: Repeater Mode

Optimization Guide

When choosing an ideal location to optimize the performance of repeater mode, please keep the points below in mind.

The Best Way is Half-Way

Generally, the ideal location for your TL-WR710N is half-way between your wireless router and your Wi-Fi enabled devices. If that is not possible, placing the TL-WR710N closer to your wireless router will ensure stable performance.

Less Obstacles = Better Performance

Try to choose a location that will minimize the number of obstacles between the TL-WR710N and your wireless router. Open corridors or other spacious locations will typically provide better conditions for performance than a crowded room.

Less Interference = More Stability.

Try to choose a location that minimizes interference from devices operating on the same wireless frequency, such as cordless phones bluetooth devices, and microwave ovens.

Appendix 3: Troubleshooting

1	What can I do if I forget my password?				3	I cannot access Internet via my Cable Modem. What do I do?
	Restore the TL-WR710N to its factory default settings (see					Reset the cable modem by powering it off, and then powering
	below).					it back on. Wait until its ONLINE LED is solid. Next, unplug the
	To log in the Web Management page, use the default user					TL-WR710N and plug it back in. This will allow you to access
						Internet in most cases.
	name and password: admin, admin.
	To connect to the Wireless Network, use the default					If the above does not work and you are unsure which mode
	password on the label.					the TL-WR710N is in, please reset the TL-WR710N so that it
	Try to configure your Router once again by following the					defaults back to Router Mode.
	instructions in the previous steps of the QIG.
2	How do I restore my TL-WR710N to factory defaultsettings?				4	What can I do if my wireless keeps dropping?
	With the Router powered on, use a pin to press and hold the					By default, your wireless channel setting is set to “auto”. This
	Reset button for about 5 seconds.					setting causes the TL-WR710N to select the least congested
						channel between 1 and 11, allowing you to achieve the best
						performance.
						You may be experiencing frequent wireless drops due to an often
						changing channel setting. In this case, setting your wireless
			USB Reset	LAN/WAN LAN		channel setting to a static channel between 1 and 11 will prevent
						the wireless frequency from changing, and likely stabilize your
		SB Reset		LA
						network connection.
	Upon reset, the device will clear all previous configurations
	and default to router mode.

Appendix 3: Troubleshooting (Continued)

5 The TL-WR710N is on and I am connected, but I cannot access		For Mac OS:
the Web Management Page through my browser.		Click the Apple icon on the upper left corner of your screen.
You need change your computer’s configuration settings to “obtain		Go to System Preferences -> Network.
		Select “Airport” from the left menu bar and then click
an IP address automatically” and “obtain DNS server address
		“Advanced” for wireless configuration, or “Ethernet” for wired
automatically.”
Please refer to the instructions below:		configuration.
		Set “Configure IPv4” to “Using DHCP”, then click “Apply”.
For Windows 7:
Go to Start -> Control Panel -> View network status and
tasks -> Change adapter settings.
Right click “Wireless Network Connection”or "Local Area
Connection", and select “Properties”.	6
Double click “Internet Protocol Version 4 (TCP/IPv4)” in the		What can I do if my signal strength is low?
list.
Set the TCP/IP Protocol to "Obtain an IP address
automatically", then click OK.		Low signal strength can be caused by obstruction from walls or
		objects. If you are receiving low signal strength, try to place your

For Windows 8:	TL-WR710N in a higher location, keeping it away from
	obstructed locations like under or behind a desk.
Go to Metro Interface -> Control Panel -> View network
status and tasks -> Change adapter settings.	Generally speaking, putting your TL-WR710N in a location
Right click “Wireless Network Connection”or "Local Area
	central to your home will maximize your signal coverage.
Connection", and select “Properties”.
Double click “Internet Protocol Version 4 (TCP/IPv4)” in the
list.
Set the TCP/IP Protocol to "Obtain an IP address
automatically", then click OK.

7	What can I do if I want to switch the Operating Mode or change
	some settings?

In any time if you want to change the Operating Mode, please refer to the "Operating Mode Configuration" Section to change the mode. You may also change any settings via the Web management page.

For more troubleshooting support, please visit:

http://www.tp-link.com/en/support/faq

or contact our Unlimited 24/7 Technical Support

Unlimited 24/7 USA/Canada

Toll Free: +1 866 225 8139

Technical Support Email: support.usa@tp-link.com

Personal Configuration

Please use the space below to write down your

custom Wireless Network Name (SSID) and password, and Web Management Page User Name and Password.

Wireless Network Name (SSID)

Wireless Password

Web Management Page User Name

Web Management Page Password

TP-LINK TECHNOLOGIES CO., LTD. www.tp-link.com