TP-Link TL-POE150S manual Connecting the PoE Injector

LAN IN: Connect to a network device (such as a Switch or Router ) with CAT5 UTP cable.

DC 48V: Connect to the provided power adapter which can supply steady power of 48V DC.

PWR: Power LED, a steady green light indicates that the PoE system has detected the PD or PoE Splitter and the power adapter is working properly.

Chapter 3 Connecting the PoE Injector

You can use TL-POE150S PoE Injector with PD or PoE Splitter to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc. The following steps will tell you how to connect the PoE Injector correctly.

1.Use a CAT5 UTP cable to connect port of Ethernet device (such as a switch, hub or router) to the LAN IN port.

2.Please connect the power adapter properly to a power socket with provided power cable, and then connect the other end of the power adapter to the DC 48V port of the TL-POE150S.

3.Connect the POWER+DATA OUT port of the TL-POE150S to a PD or a PoE Splitter with CAT 5 UTP cable.

Now, the device can work normally with data and power. There are two schemes to realize the PoE.

1.If the device supports PoE (take an IP camera with PoE for example), following topology will work:

3