SafeStreamTM Gigabit Broadband VPN Router User GuideTL-R600VPN
52
To add/modify a static routing entry:
Step 1: Click Add New…/Modify shown in Figure 4-48, you will see a new screen shown in
Figure 4-49.
Step 2: Enter the appropriate Destination IP Address, Subnet Mask and Default Gateway, and
then select the status.
Figure 4-49
Step 3: Click Save to make the entry take effect.
) Note:
If you want to add more than one static route, please go to step 1 to continue.
Other configurations for the entries as shown in Figure 4-48.
Click the Delete button to delete the entry.
Click the Enable All button to enable all the entries.
Click the Disable All button to disable all the entries.
Click the Delete All button to delete all the entries.
Click the Previous button to view the information in the previous screen, click the Next button to
view the information in the next screen.
4.11 Bandwidth Control
Choose menu “Bandwidth Control”, the next submenus are shown below.
Figure 4-50
Click any of them, and you will be able to configure the corresponding function. The detailed
explanations for each submenu are provided below.

4.11.1 Control Settings

Choose menu “Control Settings”, you can configure the Egress Bandwidth and Ingress Band-
width in the next screen (shown in Figure 4-51).