Chapter 2 Identifying External Components
This Chapter describes the front panel, rear panel and LED indicators of the Switch.
2.1 Front Panel
The front panel of
Figure
The LED indicators include Power, Link/Act LED indicators, which are used for monitoring and
¾Power LED: This indicator will light solid red when the Switch powers up. If the LED is not lit, please check the power supply and connection.
¾Link/Act LED: The LED indicates Link/Active status. The corresponding LED indicator will light solid green when connected to a network device. It flashes green when data is being transmitted or received on the working connection.
¾100Mbps: The corresponding port LED indicator will light solid green when it's working on 100Mbps speed. Not lit indicates working on 10Mbps speed.
Note:
Because of the difference among the mode of switch, some switches don’t include the 100Mbps indicator, such as
2.2 Rear Panel
The rear panel of 
).
Figure
3
