TP-Link TL-SG2210P/TL-SG2216/TL-SG2424/ TL-SG2424P/TL-SG2452 Chapter 13 QoS Commands , qos

92
Chapter 13 QoS Commands
QoS (Quality of Service) function is used to optimize the network performance. It provides you with
network service experience of a better quality.
qos
For TL-SG2210P:
Description
The qos command is used to configure the priority level of packets from the port.
To return to the default configuration, please use no qos command.
Syntax
qos pri
no qos
Parameter
pri —— The priority level of port. The port priorities are labeled as TC0,TC1,TC2
and TC3. By default, the priority is TC0.
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet)
Example
Configure the priority of port 5 as TC3:
TL-SG2210P(config)# interface gigabitEthernet 1/0/5
TL-SG2210P (config-if)# qos 3
For TL-SG2216/TL-SG2424/TL-SG2424P/TL-SG2452:
Description
The qos command is used to configure CoS (Class of Service) based on port.
To return to the default configuration, please use no qos command.
Syntax
qos cos-id
no qos