Wrong configuration or malicious attacks may result in configuration BPDU packets with higher priorities being received by the legal root bridge, which causes the current legal root bridge to lose its position and network topology jitter to occur. In this case, flows that should travel along high-speed links may lead to low-speed links, and network congestion may occur.

To avoid this, MSTP provides root protect function. Ports with this function enabled can only be set as designated ports in all spanning tree instances. When a port of this type receives BDPU packets with higher priority, it transits its state to blocking state and stops forwarding packets (as if it is disconnected from the link). The port resumes the normal state if it does not receive any configuration BPDU packets with higher priorities for a period of two times of forward delay.

¾TC Protect

A switch removes MAC address entries upon receiving TC-BPDU packets. If a user maliciously sends a large amount of TC-BPDU packets to a switch in a short period, the switch will be busy with removing MAC address entries, which may decrease the performance and stability of the network.

To prevent the switch from frequently removing MAC address entries, you can enable the TC protect function on the switch. With TC protect function enabled, if the account number of the received TC-BPDUs exceeds the maximum number you set in the TC threshold field, the switch will not performs the removing operation in the TC protect cycle. Such a mechanism prevents the switch from frequently removing MAC address entries.

¾BPDU Protect

Ports of the switch directly connected to PCs or servers are configured as edge ports to rapidly transit their states. When these ports receive BPDUs, the system automatically configures these ports as non-edge ports and regenerates spanning trees, which may cause network topology jitter. Normally these ports do not receive BPDUs, but if a user maliciously attacks the switch by sending BPDUs, network topology jitter occurs.

To prevent this attack, MSTP provides BPDU protect function. With this function enabled on the switch, the switch shuts down the edge ports that receive BPDUs and reports these cases to the administrator. If a port is shut down, only the administrator can restore it.

¾BPDU Filter

BPDU filter function is to prevent BPDUs flood in the STP network. If a switch receives malicious BPDUs, it forwards these BPDUs to the other switched in the network, which may result in spanning trees being continuously regenerated. In this case, the switch occupying too much CPU or the protocol status of BPDUs is wrong.

With BPDU filter function enabled, a port does not receive or forward BPDUs, but it sends out its own BPDUs. Such a mechanism prevents the switch from being attacked by BPDUs so as to guarantee generation the spanning trees correct.

Choose the menu Spanning Tree→STP Security→Port Protect to load the following page.

92

Page 100 Page 102
Page 101
Image 101
TP-Link TL-SG3424P manual ¾ TC Protect, ¾ Bpdu Protect, ¾ Bpdu Filter
Page 100 Page 102

TL-SG3424P specifications

The TP-Link TL-SG3424P is a high-performance managed switch designed to meet the needs of small to medium-sized businesses. Offering 24 Gigabit Ethernet ports, this device is an ideal solution for improving network efficiency and ensuring seamless data transfer across multiple devices. The switch not only facilitates connectivity but also provides robust management features to enhance the performance and security of your network.

One of the standout features of the TL-SG3424P is its Power over Ethernet (PoE) capability, which allows it to deliver power and data over the same Ethernet cable. This feature is particularly beneficial for deploying devices such as IP cameras, VoIP phones, and wireless access points without the need for additional power sources. With a total power budget of 250W, the TL-SG3424P can support a diverse range of PoE devices, providing convenience and flexibility in deployment.

In terms of management, the TL-SG3424P offers a user-friendly web interface, allowing network administrators to configure and monitor the switch with ease. It supports advanced Layer 2 features, including VLANs, Quality of Service (QoS), and Link Aggregation. These features enhance network performance by optimizing traffic flow and prioritizing essential applications. The switch also includes comprehensive security features, such as Port Security and Access Control Lists (ACL), which help protect against unauthorized access and ensure data integrity.

The build quality of the TL-SG3424P is robust, designed to handle demanding network environments. It includes a fanless design, which ensures silent operation, making it suitable for office environments where noise can be a distraction. The metal chassis is durable and built for longevity, ensuring that the device will withstand rigorous usage over time.

Furthermore, the TL-SG3424P supports SNMP (Simple Network Management Protocol), allowing for centralized network monitoring and management. This makes it easier for IT teams to keep track of network health and performance, enabling timely interventions when necessary.

In conclusion, the TP-Link TL-SG3424P is a versatile and powerful managed switch that combines PoE capabilities with advanced network management features, making it a perfect choice for businesses looking to upgrade their network infrastructure. With its reliable performance and robust features, it provides an excellent solution for enhancing productivity and connectivity in any office setting.
Top Page Image Contents