TP-Link TL-SG5412F, TL-SG5428 9.2 Bandwidth Control

Priority Level: Indicates the priority level the packets with tag are mapped to. The

priority levels are labeled as TC0, TC1, TC2 and TC3.

Note:

To complete QoS function configuration, you have to go to the Schedule Mode page to select a

schedule mode after the configuration is finished on this page.

Configuration Procedure:

Step Operation Description

1 Configure the mapping

relation between the DSCP

priority and TC

Required. On QoS→DiffServ→DSCP Priority page,

enable DSCP Priority and configure the mapping

relation between the DSCP priority and TC.

2 Select a schedule mode Required. On QoS→DiffServ→Schedule Mode

page, select a schedule mode.

9.2 Bandwidth Control

Bandwidth function, allowing you to control the traffic rate and broadcast flow on each port to

ensure network in working order, can be implemented on Rate Limit and Storm Control pages.

Rate limit functions to control the ingress/egress traffic rate on each port via configuring the

available bandwidth of each port. In this way, the network bandwidth can be reasonably distributed

and utilized.

Choose the menu QoS→Bandwidth Control→Rate Limit to load the following page.

Figure 9-10 Rate Limit

122