15
Gigabit Uplink Unmanaged Switch
41C Ethernet Port
Please connect the Ethernet ports of the switch to the network devices by R J45 cable
as the following figure shown.
RJ45 Port
RJ45 Cable
Figure 4-1 Connecting the RJ45 Port
411 SFP Port
Connect the SFP port to a SFP module. The switch could identify and configure the SFP
module automatically (for TL-SL1351 only1.
SFP Module
SFP Port
Figure 4-2 Inserting the SFP Module
411 Verify Installation
After completing the installation, please verify the foll owing items:
There are 5~10cm of clearance around the side s of the device for ventilation and
■
the air flow is adequate.
The voltage of the power supply meets the requirement of the input voltag e of the device.
■
The power socket, device and rack are well grounded.
■
The device is correctly connected to other net work device.
■
Connection