TL-SL21098+1G Gigabit Ethernet Smart Switch User Guide

Chapter 3: Installation

3.1 Installation

Firstly, please place the switch following the steps:

The surface must support at least 5kg; The power source must be within 1.5m;

Check the power cable carefully to make sure the connection to AC power; Leave enough space for the ventilation.

3.1.1 Installation on the desktop

1.Place the Switch on a desk which has enough space;

2.Take off the four pads’ adhesive tape and adhere to the four circle grooves on the bottom of the switch respectively;

3.Turn off the switch again, place on the desktop.

3.1.2 Rack Installation

The TL-SL2109 can be mounting in an EIA Standard size 19 inches rack.

1.Attach the mounting brackets to each side of the TL-SL2109 with the screwes;

2.Slide the TL-SL2109 into the rack;

3.Use the screwes to secure the switch to the rack..

Figure 3-1 Rivet the “L” brackets onto the Switch

- 5 -