Select ACL:
S-Mirror: ror to mirror the data packets in the policy to the specific
S-Condition:
Out of Band: Specify the disposal way of the data packets those
Redirect:
Destination Port: Forward the data packets those match the
corresponding ACL to the specific port.
s and process them based on the policy only when the policy is bound to the
Binding can be implemented on Binding Table, Port Binding and VLAN Binding
Choose the menu ACL→Policy Binding→Binding Table to load the following page.
Select the ACL for configuration in the policy.
Select S-Mir
port.
leSe ct S-Condition to limit the transmission rate of the data packets in
the policy.
Rate: Specify the forwarding rate of the data packets those match
the corresponding ACL.
are transmitted beyond the rate.
eSel ct Redirect to change the forw arding direction of the data packets
in the policy.
Policy Binding function can have the policy take its effect on a specific port/VLAN. The policy will
take effect only when it is bound to a port/VLAN. In the same way, the port/VLAN will receive the
data packet
port/VLAN.
The Policy
pages.
10.4.1 Binding Table
On this page view the policy bound to port/VLAN.
Figure 10-12 Binding Table
The following entries are displayed on this screen:
Select a show mode appropriate to your needs.
ind Table
esponding binding policy.
Search Option
Show Mode:
Policy B
Select: Select the desired entry to delete the corr
133