L2 Managed Switch
CCCCCCCCCCCConnection
4444 Ethernet Port
Connect the Ethernet ports of the Switch to the network devices by RJ45 cable as the following figure shown.
RJ45 Port | RJ45 Cable |
|
FFFFFFFFFFFFConnecting the RJ45 Port
4444SFP Port
Connect the SFP port to a SFP module. For the switch, if an SFP transceiver (purchased separately) is installed in a slot and has a valid link on the port, the associated RJ45 port will be disabled and cannot be used.
SFP Port
SFP Module
FFFFFFFFFFFFInserting the SFP Module
4444Console Port
CLI (Command Line Interface) enables you to manage the Switch, thus you can load the CLI after connecting the PCs or Terminals to the console port on the Switch via the provided cable.
Connect the console port of the device with your computer by the console cable as the following figure shown.
13 
Connection
