TP-Link TL-SL5428E manual Rear Panel, 10/100Mbps Port

L2 Managed Switch

Note: The Switch features some “Combo” ports. A “Combo” port consists of a RJ45 port and a SFP port, and the two ports share the same LED.

Port Feature

Model	10/100Mbps	10/100/1000Mbps	Console Port	SFP Port
	RJ45 Port	RJ45 Port
TL-SL5428E	24	4	1	2

10/100Mbps Port

Designed to connect to the device with a bandwidth of 10Mbps or 100Mbps. Each has a corresponding 10/100Mbps LED.

10/100/1000Mbps Port

Designed to connect to the device with a bandwidth of 10Mbps, 100Mbps or 1000Mbps. Each has a corresponding 1000Mbps LED.

Console Port

Designed to connect with the serial port of a computer or terminal for monitoring and configuring the Switch.

SFP Port

Designed to install the SFP module. TL-SL5428E Switch features some SFP transceiver slots that are shared with the associated RJ45 ports. The associated two ports are referred as a “Combo” port, which means they cannot be used simultaneously, otherwise only SFP port works.

■■ Rear Panel

The rear panel of TL-SL5428E is shown as the following figure.

Grounding Terminal

Power Socket

FFFFFFFFFFFFRear Panel of TL-SL5428E

Grounding Terminal

The Switch already comes with lightning protection mechanism. You can also ground the Switch through the PE (Protecting Earth) cable of AC cord or with Ground Cable. For detailed information, please refer to Chapter 3 Lightning Protection.

Introduction 02