Manageability
+ IP Clustering provides high scalability and easy Single-IP-Management.
+ Supports Telnet, CLI, SNMP v1/v2c/v3, RMON and web access.
+ Port Mirroring enables monitoring selected ingress/egress traffic.
2.3 Appearance Description 2.3.1 Front Panel
Figure 2-1 Front Panel
The following parts are located on the front panel of the switch:
10/100Mbps RJ45 Ports: Designed to connect to a device with the bandwidth of 10Mbps or
100Mbps. Each has a corresponding 10/100Mbps LED.
10/100/1000Mbps RJ45 Ports: Designed to connect to a device with the bandwidth of 10Mbps,
100Mbps or 1000Mbps. Each has a corresponding 1000Mbps LED.
SFP Ports: Designed to install the SFP module. Port 27F shares the same LED with Port 27T
and Port 28F shares the same LED with Port 28T.
Console Port: Designed to connect with the serial port of a computer or terminal for monitoring
and configuring the switch.
LEDs
Name Status Indication
On Power is on.
Flashing Power supply is abnormal.
PWR
Off Power is off or power supply is abnormal.
On The switch is working abnormally.
Flashing The switch is working normally.
SYS
Off The switch is working abnormally.
On A device is linked to the corresponding port.
Flashing Data is being transmitted or received.
Green The linked device is running at 100Mbps.
10/100Mbps
Yellow The linked device is running at 10Mbps.
On A device is linked to the corresponding port.
Flashing Data is being transmitted or received.
Green The linked device is running at 1000Mbps.
1000Mbps
Yellow The linked device is running at 10/100Mbps.
7