TP-Link TL-WDN4800 manual Hardware Connection, Steps, Package Contents, Software Installation

Quick Installation Guide

450Mbps Wireless N Dual Band PCI Express Adapter

Package Contents 1 Hardware Connection

You may see the Found New Hardware Wizard after the adapter has been inserted. Please click ‘Cancel’.

For Windows XP

PCI450Mbps					450Mbps Wireless N Dual Band PCI Express Adapter
				TL-
450Mbps WirelessExpressN		Dual		WDN4800
				Band
Dual	Band	PCI
			Express
				Adapter

MODEL NO. TL-WDN4800

TL-WDN4800QIG

For Windows Vista

Steps:

1. Turn o￿ your computer and unplug the power cord from the computer.

Resource CD2. Open the case. Locate an available PCI Express slot and remove its slot cover. Keep the screw.

3. Insert the adapter into the PCI Express slot as shown above.

System Requirement

4.Secure the adapter with the screw removed in Step 2.

5.Close the case and insert the power cord back into the computer.

· Windows 7 · Windows Vista · Windows XP 6. Turn on your computer.

MODEL NO. TL-WDN4800

2 Software Installation (The installtion procedures in Windows 7/ Vista/ XP are similar. Here takes the procedures in Windows 7 for example.)

1	Insert the TP-LINK Resource CD into the CD-ROM	3	The InstallShield Wizard window will appear.	5	Click Change to specify the destination location
	drive.		Click Next to continue.		or you can leave it default. Click Next to continue.

7The installation process may take 1~2 minutes.

2Find the model TL-WDN4800 and select Install Driver&Utility.

4Select Install TP-LINK Wireless Con￿guration Utility and Driver and then click Next.

6Click Install to install the driver and utility for your adapter.

8The following screen will then appear. Click Finish to complete the setup.

7106504041