I.PBC Method

TL-WN7200N150Mbps High Power Wireless USB Adapter User Guide

)Note:

To build a successful connection by QSS, you should also do the corresponding configuration of the Access Point for QSS or WPS function meanwhile.

I.PBC Method

If your Access Point is equipped with a push-button for Wi-Fi Protected Setup, you can connect the adapter to the Access Point by Push QSS Button method.

Figure 3-9 QSS- QSS BUTTON mode

Step 1 Click the QSS button (marked by the red circle) on the screen as Figure 3-9.

Or: Press and hold the QSS button on the adapter (shown on the following figure) for 2 or 3 seconds.

Step 2 Press the QSS button on your Access Point device to build the connection.

II. PIN Method

If your Access Point supports Wi-Fi Protected Setup and the PIN method, you can add the adapter to the network by the following two ways:

- 16 -

Page 21
Image 21
TP-Link manual TL-WN7200N 150Mbps High Power Wireless USB Adapter User Guide, I. PBC Method, II. PIN Method