3.1.4 Statistics
Click the Statistics tab of the Utility and you will see the following screen displaying the receiving and transmitting statistical information. Click the Reset Counter button to reset the count of the statistics information.
Figure
3.1.5 QSS
Click the QSS tab of the Utility and you can configure the QSS function to joint an existing network quickly in the following screen.
Figure
¾The QSS connection will be automatically displayed on the QSS Profile List. Pitch on the Profile and click Export Profile to add a Profile to the Profile List (Section 3.1.1).
¾The Auto function is default to enable that the adapter will automatically try to build the connection with the Access Point devices shown in the QSS AP List one by one.
¾You can also establish a wireless connection by using either Push QSS Button method or PIN method. It is recommended that you choose the simplest method that your AP device supports.
-15 -
