TP-Link manual Hardware Installation, TL-WN951N 300Mbps Wireless N PCI Adapter User Guide

TL-WN951N300Mbps Wireless N PCI Adapter User Guide

Chapter 2 Installation

Please install the PCI adapter into your computer before installing the driver and utility software from the Resource CD.

2.1Hardware Installation

1.Turn off your computer and unplug the power cord from the computer.

2.Open the case and locate an available PCI slot. Remove the metal slot cover on the back of the PC. Keep the screws. Turn to your computer manufacturer for instructions if needed.

3.Insert the PCI adapter into the PC slot. Make sure that all of its pins have touched the slot's contacts. Once the adapter has been firmly inserted, screw its fastening tab. Then, close your PC case.

4.Insert the power cable back into the computer and turn on your computer.

)Note:

When the hardware has been successfully installed on your computer, you will be prompted 'Found New Hardware Wizard' (as shown in Figure 2-1and Figure 2-2); please click Cancel, and then follow the Software Installation steps to install driver and utility for your adapter.

Figure 2-1 Found New Hardware Wizard in Windows XP

4