TL-WR542G54M Wireless Router User Guide

2.3.2 The Rear Panel

The rear panel contains the following features. (Viewed from left to right:)

Wireless antenna

Factory Default Reset button

There are two ways to reset the router's factory defaults:

1)Use the Factory Defaults function on System Tools ->Factory Defaults page in the router's Web-based Utility.

2)Use the Factory Default Reset button: First, turn off the router's power. Second, press and hold the default reset button then turn on the router's power, until the system LED lights up (about 3 seconds). Last, release the reset button and wait for the router to reboot.

Note: Ensure the router is powered on before it restarts completely.

WAN RJ45 port for connecting the router to a cable, DSL modem, or Ethernet Four LAN 10/100Mbps RJ45 ports for connecting the router to the local PCs

AC power socket: only use the power adapter supplied with the TL-WR542G 54Mbps Wireless Router, use of a different adapter may result in product damage.

WAN

1

2

3

4

RESET

Figure 2-2: Rear Panel sketch

- 5 -