TP-Link TL-WR740N 4.5 Network

TL-WR740N/TL-WR741ND 150Mbps Wireless N Router

-25-

4.5 Network

Figure 4-4 the Network menu

There are three submenus under the Network menu (shown in Figure 4-4): WAN, LAN and MAC

Clone. Click any of them, and you will be able to configure the corresponding function.

Choose menu “Network→WAN”, and then you can configure the IP parameters of the WAN on

the screen below.

1. If your ISP provides the DHCP service, please choose Dynamic IP type, and the Router will

automatically get IP parameters from your ISP. You can see the page as follows (Figure

4-5):

Figure 4-5 WAN - Dynamic IP

This page displays the WAN IP parameters assigned dynamically by your ISP, including IP

address, Subnet Mask, Default Gateway, etc. Click the Renew button to renew the IP