TP-Link TL-WR740N 4.7 DHCP

TL-WR740N/TL-WR741ND 150Mbps Wireless N Router

-46-

4.7 DHCP

Figure 4-24 The DHCP menu

There are three submenus under the DHCP menu (shown in Figure 4-24): DHCP Settings, DHCP

Clients List and Address Reservation. Click any of them, and you will be able to configure the

corresponding function.

Choose menu “DHCP→DHCP Settings”, and then you can configure the DHCP Server on the

page (shown in Figure 4-25).The Router is set up by default as a DHCP (Dynamic Host

Configuration Protocol) server, which provides the TCP/IP configuration for all the PC(s) that are

connected to the Router on the LAN.

Figure 4-25 DHCP Settings

¾ DHCP Server - Enable or Disable the DHCP server. If you disable the Server, you must

have another DHCP server within your network or else you must configure the computer

manually.

¾ Start IP Address - Specify an IP address for the DHCP Server to start with when assigning

IP addresses. 192.168.0.100 is the default start address.

¾ End IP Address - Specify an IP address for the DHCP Server to end with when assigning IP

addresses. 192.168.0.199 is the default end address.