TP-Link manual Network, 4.5.1 WAN, TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide

Models: TL-WR841N

1 112
Download 112 pages 39.3 Kb
Page 30
Image 30
4.5 Network

TL-WR841N/TL-WR841ND300Mbps Wireless N Router User Guide

)Note:

1)The WPS LED on the Router will light green for five minutes if the device has been successfully added to the network.

2)The WPS function cannot be configured if the Wireless Function of the Router is disabled. Please make sure the Wireless Function is enabled before configuring the WPS.

4.5 Network

Figure 4-5 the Network menu

There are three submenus under the Network menu (shown in Figure 4-5): LAN, WAN and MAC Clone. Click any of them, and you will be able to configure the corresponding function.

4.5.1 WAN

Choose menu “Network WAN”, you can configure the IP parameters of the WAN on the screen below.

1.If your ISP provides the DHCP service, please choose Dynamic IP type, and the Router will automatically get IP parameters from your ISP. You can see the page as follows (Figure

4-6):

- 21 -

Page 30
Image 30
TP-Link manual Network, 4.5.1 WAN, TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide