TP-Link manual TL-WR841N/TL-WR841ND, 300Mbps Wireless N Router User Guide, 8 WAN - PPPoE

Models: TL-WR841N

1 112
Download 112 pages 39.3 Kb
Page 33
Image 33
Figure 4-8 WAN - PPPoE

TL-WR841N/TL-WR841ND

300Mbps Wireless N Router User Guide

3.If your ISP provides a PPPoE connection, select PPPoE/Russia PPPoE option. Then should enter the following parameters (Figure 4-8):

Figure 4-8 WAN - PPPoE

¾User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive.

¾Secondary Connection - It’s available only for PPPoE Connection. If your ISP provides an extra Connection type such as Dynamic/Static IP to connect to a local area network, then you can check the radio button of Dynamic/Static IP to activate this secondary connection.

z Disabled - The Secondary Connection is disabled by default, so there is PPPoE connection only. This is recommended.

z Dynamic IP - You can check this radio button to use Dynamic IP as the secondary connection to connect to the local area network provided by ISP.

z Static IP - You can check this radio button to use Static IP as the secondary connection to connect to the local area network provided by ISP.

¾Connect on Demand - In this mode, the Internet connection can be terminated automatically after a specified inactivity period (Max Idle Time) and be re-established when you attempt to access the Internet again. If you want your Internet connection keeps active all the time, please enter “0” in the Max Idle Time field. Otherwise, enter the number of minutes you want

- 24 -

Page 33
Image 33
TP-Link manual TL-WR841N/TL-WR841ND, 300Mbps Wireless N Router User Guide, 8 WAN - PPPoE