General
Data
Product Specifications 1
MODEL | TUD100C936K | TUD100C945K | TUD100C948K | TUD100C960K | |
TYPE |
| Upflow / Horizontal | Upflow / Horizontal | Upflow / Horizontal | Upflow / Horizontal |
RATINGS 2 |
|
|
|
| |
Input BTUH | 100,000 | 100,000 | 100,000 | 100,000 | |
Capacity BTUH (ICS) 3 | 79,000 | 79,000 | 79,000 | 79,000 | |
AFUE |
| 80.0 | 80.0 | 80.0 | 80.0 |
Temp. rise | 40 - 70 | 35 - 65 | 35 - 65 | 30 - 60 | |
BLOWER DRIVE | DIRECT | DIRECT | DIRECT | DIRECT | |
Diameter - Width (In.) | 10 x 7 | 10 x 8 | 10 x 8 | 11 x 10 | |
No. Used | 1 | 1 | 1 | 1 | |
Speeds (No.) | 4 | 4 | 4 | 4 | |
CFM vs. in. w.g. | See Fan Performance Table | See Fan Performance Table | See Fan Performance Table | See Fan Performance Table | |
Motor HP | 1/3 | 1/3 | 1/2 | 1/2 | |
R.P.M. |
| 1075 | 1075 | 1075 | 1075 |
Volts / Ph / Hz | 115/1/60 | 115/1/60 | 115/1/60 | 115/1/60 | |
COMBUSTION FAN - Type | Centrifugal | Centrifugal | Centrifugal | Centrifugal | |
Drive - | No. Speeds | Direct - 1 | Direct - 1 | Direct - 1 | Direct - 1 |
Motor HP - RPM | 1/50 - 3000 | 1/50 - 3000 | 1/50 - 3000 | 1/50 - 3000 | |
Volts / Ph / Hz | 115/1/60 | 115/1/60 | 115/1/60 | 115/1/60 | |
FLA |
| 1.0 | 1.0 | 1.0 | 1.0 |
FILTER — Furnished? | Yes | Yes | Yes | Yes | |
Type Recommended | High Velocity | High Velocity | High Velocity | High Velocity | |
Hi Vel. | 1 - 17x25 - 1in. | 1 - 17x25 - 1in. | 1 - 20x25 - 1in. | 1 - 20x25 - 1in. | |
VENT — Size (in.) | 4 Round | 4 Round | 4 Round | 4 Round | |
HEAT EXCHANGER |
|
|
|
| |
Type | Aluminized Steel - Type I | Aluminized Steel - Type I | Aluminized Steel - Type I | Aluminized Steel - Type I | |
|
|
|
|
| |
Gauge (Fired) | 20 | 20 | 20 | 20 | |
ORIFICES — Main |
|
|
|
| |
Nat. Gas. Qty. — Drill Size | 5 — 45 | 5 — 45 | 5 — 45 | 5 — 45 | |
L.P. Gas Qty. — Drill Size | 5 — 56 | 5 — 56 | 5 — 56 | 5 — 56 | |
GAS VALVE | Redundant - Single Stage | Redundant - Single Stage | Redundant - Single Stage | Redundant - Single Stage | |
PILOT SAFETY DEVICE |
|
|
|
| |
Type |
| Hot Surface Ignition | Hot Surface Ignition | Hot Surface Ignition | Hot Surface Ignition |
BURNERS — Type | |||||
Number | 5 | 5 | 5 | 5 | |
POWER CONN. — V / Ph / Hz 4 | 115/1/60 | 115/1/60 | 115/1/60 | 115/1/60 | |
Ampacity (In Amps) | 10.4 | 10.4 | 12.0 | 12.8 | |
Max. Overcurrent Protection (Amps) | 15 | 15 | 15 | 15 | |
PIPE CONN. SIZE (IN.) | 1/2 | 1/2 | 1/2 | 1/2 | |
DIMENSIONS | H x W x D | H x W x D | H x W x D | H x W x D | |
Crated (In.) | |||||
WEIGHT |
|
|
|
| |
Shipping (Lbs.) / Net (Lbs) | 151 / 141 | 153 / 143 | 162 / 151 | 162 / 151 |
1Central Furnace heating designs are certified by AGA and CSA.
2For U.S. applications, above input ratings (BTUH) are up to 2,000 feet, derate 4% per 1,000 feet for elevations above 2,000 feet above sea level. For Canadian applications, above input ratings (BTUH) are up to 4,500 feet, derate 4% per 1,000 feet for elevations above 4,500 feet above sea level.
3Based on U.S. government standard tests.
4 The above wiring specifications are in accordance with National Electrical Code; however, installations must comply with local codes.
8 |