Installation- Electrical
Field Wiring Connections
Power wiring to the unit should be in- stalled per local electric codes by a professional electrician.
The wires can be run to the unit through the available knockouts
and to the control box in the top half of the unit.
Control wiring to the unit is 24 volt. The termination point identifications for the terminal strip is identified per Figure 5.
5Compressor
6Reversing valve (energized in cooling)
1Common
(X13510588020) Manual changeover:
TWE
(Sizes
GSSD (Sizes
GSSD 24V Field Wiring
R | F | Y2 | O | C | W1 | W2 |
R | G | Y | O | B | W1 | W2 |
3 | 4 | 5 | 6 | 1 |
Figure 5: Field wire connections.
1K1 to Water Pump and L1 / L2
|
|
| Hi Voltage |
|
|
| |
| Low Voltage |
| Terminal Strip |
|
|
| for Low Voltage |
|
|
| |
|
|
| to TWE |
Pump Control | Ground | ||
|
|
|
11