general
Installation information
General Information
The integral
460/3/60, 575/3/60.
Refrigeration Circuits
Units are configured in single or double refrigeration circuits. Each circuit consists of a:
•high efficiency scroll compressor mounted on rubber isolation grommets
•condenser and evaporator coils, designed for optimum performance and efficiency with lanced fins and rifled tubing,
•and
Evaporator Section
The evaporator fan section consists of one or two forward curved centrifugal fans powered by a premium efficiency motor through an adjustable motor sheave, and fixed diameter blower pulley.The condenser fan section consists of one or two forward curved centrifugal fans powered by a premium efficiency motor through an adjustable motor sheave and fixed diameter blower pulley. Condenser motor belt tension is adjusted by an adjustable motor mounting base.
Control box access is from the front of the unit to ease electrical
Controls
The standard control panel consists of a high voltage terminal block, overload relays for each fan motor, transformer, 3- pole 24 volt contactors for each motor and compressor, and a
Field Installed Accessories
These items ship separately for field installation:
•steam coil
•hot water coil
•plenum
•low ambient damper
•oversized motors
•remote thermostat
Note: Application of the above options and/or accessories may require field adjustment of fan speeds to ensure proper airflow and performance.
Unit Nameplate
The unit nameplate identifies the unit model number, appropriate service literature, and wiring diagram numbers. It is mounted on the control panel door. Reference this information when making inquires or ordering parts or literature.
6 |