Transcend Information TS2GMP650, TS4GMP650, MP650 Connecting to a Computer

Connecting to a Computer︱

If you are using Windows Media Player 10 and want to play WMA-DRM10 music files, you

must set the Digital Music Player’s Music Transfer Mode to MTP to transfer and

synchronize music files between the computer and your MP650.

If you want to use your MP650 to listen to music other than the Radio, you must transfer MP3, WMA, or

WMA-DRM10 music files to the player. When the MP650 is connected to a computer it is locked into

transferring files. You will not be able to play or record any music at this time. Please disconnect your MP650

from the computer when you want to use the player.

1. Plug the small end of the USB cable into the Mini USB port on the Digital Music Player and plug the

large end of the cable into an available USB port on your desktop or notebook computer. While the

Digital Music Player is connected to a computer, it can only be used for transferring files. The

MP650’s rechargeable Li-ion battery will begin charging.

Figure 5. Connecting to a Computer

2. When connected to a computer the MP650’s screen will display a “READY” message, indicating that

files can be loaded onto the player.

 You cannot play or record music when the MP650 is connected to a computer.

If you are using Windows® a new Removable Disk drive with a newly assigned drive letter representing the

MP650 will appear in the My Computer window.