Transcend Information TS64 Identify Device Information Default Value, Word Value Description

TS32/64/128GSSD18M-M							1.8” Portable Solid State Drive
			Identify Device Information Default Value
Word	Value	F/V				Description
0	0040h				General configuration bit-significant information:
		F			15 0 = ATA device
		X		14-8		Retired
		X		7-6		Obsolete
		X		5-3		Retired
		V		2		Reserved
		X		1		Retired
				0		Reserved
1	3FFFh	F			Number of logical cylinders
2	C837h	V			Specific configuration
3	0010h	F			Number of logical heads
4-5	0000h	X			Retired
6	003Fh	F			Number of logical sector per logical track
7-8	0000h				Reserved for assignment by the CompactFlash_ Association
9	0000h	X			Retired
10-19	XXXXh	F			Serial number (20 ASCII characters)
20-21	0000h	X			Retired
22	0000h	X			Obsolete
23-26	XXXXh	F			Firmware revision (8 ASCII characters)
27-46	XXXXh	F			Model number (40 ASCII characters)
47	8001h	F		15-8		80h
		F		7-0		00h = Reserved
		F				01h = Maximum number of 1 sectors on READ/WRITE MULTIPLE commands
48	0000h	F			Reserved
49	2F00h				Capabilities
					15-14 Reserved for the IDENTIFY PACKET DEVICE command.
		F			13 1 = Standby timer values as specified in this standard are supported
						0 = Standby timer values shall be managed by the device
					12 Reserved for the IDENTIFY PACKET DEVICE command.
		F			11 1 = IORDY supported
						0 = IORDY may be supported
		F			10 1 = IORDY may be disabled
		F			9 1 = LBA supported
		F			8 1 = DMA supported.
		X		7-0		Retired
50	4000h				Capabilities
		F			15 Shall be cleared to zero.
		F			14 Shall be set to one.
				13-2		Reserved.
		X		1		Obsolete
		F			0 Shall be set to one to indicate a device specific Standby timer value minimum.
Transcend Information Inc.						16
							V1.2