Transcend Information TS64, TS32 Smart Read Attribute Threshold, Smart Save Attribute Value

TS32/64/128GSSD18M-M 1.8” Portable Solid State Drive

EBh

ECh-FFh

Good Block Count, System Block Count	0	Good Block Count (High Byte)
	1	Good Block Count
	2	Good Block Count (Low Byte)
	3	System(Free) Block Count (High
	4	Byte)
	5	System(Free) Block Count (Low
	6	Byte)
	7	Reserved
		Reserved
		Reserved
Reserved

SMART READ ATTRIBUTE THRESHOLD

This transfers 512 bytes of drive failure threshold data to the host.

SMART ENABLE/DISABLE ATTRIBUTE AUTOSAVE

Enables or disables the attribute value autosave function. This command specifies whether the current attribute values are automatically saved to the drive when it changes the mode. This setting is maintained when the power is turned on and off.

SMART SAVE ATTRIBUTE VALUE

Saves any modified attribute values.

SMART EXECUTE OFF-LINE IMMEDIATE

This command of Non-data input causes the controller to immediately initiate the set of activities that collect SMART data in a off-line mode and then save data to the Nand flash memory, or execute a selfdiagnostic test routine in either captive or off-line mode.

SMART ENABL OPERATIONS

Enables the SMART function. This setting is maintained when the power is turned off and then back on. Once the SMART function is enabled, subsequent SMART ENABLE OPERATIONS commands do not affect any parameters.

Transcend Information Inc.

28 V1.2