Transcend Information TS64GSSD25-M, TS128GSSD25-M, TS16GSSD25-S Smart Read Attribute Threshold

TS8GSSD25-S
TS16GSSD25-S
TS32GSSD25-S/M
TS64GSSD25-S/M				2.5” Solid State Disk
TS128GSSD25-M
			5	Max Erase Count (Low Byte)
			6	Reserved
			7	Reserved
	EBh	Good Block Count, System Block Count	0	Good Block Count (High Byte)
			1	Good Block Count
			2	Good Block Count (Low Byte)
			3	System(Free) Block Count (High
			4	Byte)
			5	System(Free) Block Count (Low
			6	Byte)
			7	Reserved
				Reserved
				Reserved
	ECh-FFh	Reserved

SMART READ ATTRIBUTE THRESHOLD

This transfers 512 bytes of drive failure threshold data to the host.

SMART ENABLE/DISABLE ATTRIBUTE AUTOSAVE

Enables or disables the attribute value autosave function. This command specifies whether the current attribute values are automatically saved to the drive when it changes the mode. This setting is maintained when the power is turned on and off.

SMART SAVE ATTRIBUTE VALUE

Saves any modified attribute values.

SMART EXECUTE OFF-LINE IMMEDIATE

This command of Non-data input causes the controller to immediately initiate the set of activities that collect SMART data in a off-line mode and then save data to the Nand flash memory, or execute a selfdiagnostic test routine in either captive or off-line mode.

Transcend Information Inc. 26

V1.08