Transcend Information TS256MSDOM22V TS128M-8GSDOM22V, 22P Vertical Type, SATA Flash Modules

TS128M-8GSDOM22V										22P Vertical Type
										SATA Flash Modules
	27	Security Unlock	F2h	–	–	–	–	Y	–	Support
	28	Seek	7Xh	–	–	Y	Y	Y	Y	Support
	29	Set Feature	EFh	Y	–	–	–	Y	–	Support
	30	Set Multiple Mode	C6h	–	Y	–	–	Y	–	Support
	31	Set Sleep Mode	E6h or 99h	–	–	–	–	Y	–	Support
	32	Standby	E2 or 96h	–	–	–	–	Y	–	Support
	33	Standby Immediate	E0 or 94h	–	–	–	–	Y	–	Support
	34	Translate Sector	87h	–	Y	Y	Y	Y	Y	Not Support	#3
	35	Wear Level	F5h	–	–	–	–	Y	–	Support	#4
	36	Write Buffer	E8h	–	–	–	–	Y	–	Support
	37	Write DMA	CAh	–	Y	Y	Y	Y	Y	Support
	38	Write Long Sector	32h or 33h	–	–	Y	Y	Y	Y	Not Support	#2
	39	Write Multiple	C5h	–	Y	Y	Y	Y	Y	Support
	40	Write Multiple w/o Erase	CDh	–	Y	Y	Y	Y	Y	Not Support	#3
	41	Write Sector(s)	30h or 31h	–	Y	Y	Y	Y	Y	Support
	42	Write Sector(s) w/o Erase	38h	–	Y	Y	Y	Y	Y	Not Support	#3
	43	Write Verify	3Ch	–	Y	Y	Y	Y	Y	Support

#1: This command is optional, depending on the key Management scheme in use.

#2: Use of this command is not recommended.

#3: CFA feature set command is not supported by P-ATA to S-ATA bridge controller.

#4: If Security command 22~27 are supported, this command is not supported.

Definitions

FR = Features Register

SC =Sector Count register (00H to FFH, 00H means 256 sectors)

SN = Sector Number register

CY = Cylinder Low/High register

DH = Head No. (0 to 15) of Drive/Head register

LBA = Logic Block Address Mode Support

–= Not used for the command Y = Used for the command

Transcend Information Inc. 8

V1.2