Transition Networks CETTF10XX-105 manual CETTF10xx-105, Slide-in-ModuleMedia Converter

User’s Guide

CETTF10xx-105

Slide-in-Module Media Converter

•Ethernet

•Copper to Fiber

•10Base-T to 10Base-FL

Transition Networks CETTF10xx-105 series Ethernet 10Base-T to 10Base-FL media converters (designed to be installed in a PointSystem™ chassis) connect 10Base-T twisted-pair copper cable to multimode or single mode 10Base-FL fiber-optic cable.

Part Number	Port One - Copper	Port Two - Fiber-Optic
	10Base-T	10Base-FL
CETTF1011-105	RJ-45	ST, 850 nm multimode, duplex
	100 m (328 ft)*	2 km (1.2 miles)
CETTF1012-105	RJ-45	ST, 1310 nm single mode, duplex
	100 m (328 ft)*	20 km (12.4 miles)
CETTF1013-105	RJ-45	SC, 850 nm multimode, duplex
	100 m (328 ft)*	2 km (1.2 miles)
CETTF1014-105	RJ-45	SC, 1310 nm single mode, duplex
	100 m (328 ft)*	20 km (12.4 miles)
CETTF1014-106	RJ-45	SC, 1310 nm single mode, duplex
	100 m (328 ft)*	20 km (12.4 miles)
CETTF1015-105	RJ-45	SC, 1310 nm single mode, duplex
	100 m (328 ft)*	40 km (24.9 miles)
CETTF1018-105	RJ-45	MT-RJ, 850 nm multimode, duplex
	100 m (328 ft)*	2 km (1.2 miles)
CETTF1022-105	RJ-45	ST, 1310 nm single mode, duplex
	100 m (328 ft)*	40 km (24.9 miles)
CETTF1027-105	RJ-45	ST, 1300 nm multimode, duplex
	100 m (328 ft)*	5 km (3.1 miles)
CETTF1029-105*	RJ-45	SC, 1310 nm (TX) / 1550 nm (RX)
	100 m (328 ft)*	single fiber, 20 km (12.4 miles)
CETTF1029-106*	RJ-45	SC, 1550 nm (TX) / 1310 nm (RX)
	100 m (328 ft)*	single fiber, 20 km (12.4 miles)

*CETTF1029-105and CETTF1029-106are designed to be installed in the same network where one is the local converter and the other is the remote converter.

The distances listed are the typical maximum cable distance. Actual distance is dependent upon the physical characteristics of the network installation.