Manuals / Transition Networks / TV and Video / Cable Box

Transition Networks DVP 5140K manual Hardware Replacement Procedures, Replacing Management Module

Models: DVP 5140K

1 46
Download 46 pages 32.7 Kb
Page 39
Image 39

4 MAINTENANCE

4.2Hardware Replacement Procedures

WARNING: The METTF10xx, MFETF10xx series Multichannel Media Converter contains no user-serviceable parts. DO NOT, UNDER ANY CIRCUMSTANCES, open and attempt to repair Multichannel Media Converter equipment. Failure to observe this warning could result in personal injury and/or death from electrical shock.

NOTE: Failure to observe the above warning will immediately void any warranty.

4.2.1Replacing Management Module

CAUTION: Wear a grounding device and observe electrostatic discharge precautions when replacing Management Module in the Multichannel Media Converter. Failure to observe this caution could result in damage to, and subsequent failure of, the Management Module.

To replace the Management Module:

1.If the Multichannel Media Converter is powered, disconnect ALL power cables from AC wall outlet.

2.Locate Management Module to be replaced at the rear of the Multichannel Media Converter.

3.Carefully remove the Management Module to be replaced from the Multichannel Media Converter by unscrewing two (2) thumbscrews that secure the Management Module to the Multichannel Media Converter and gently sliding the Management Module from the Multichannel Media Converter.

4.Carefully slide the replacement Management Module into the Multichannel Media Converter.

Ensure that the frame of the Management Module runs smoothly between the guides at the bottom of the Multichannel Media Converter. Note a slight resistance just before the Management Module frame comes flush with the rear panel of the Multichannel Media Converter. At this point, ensure that the edges of the Management Module run parallel to the corresponding edges of the Multichannel Media Converter. Then, apply gentle pressure to seat the Management Module in the Multichannel Media Converter.

5.Tighten the two (2) thumbscrews that secure the replacement Management Module to the Multichannel Media Converter.

MULTICHANNEL MEDIA CONVERTER

4.5

Page 38 Page 40
Page 39
Image 39
Transition Networks DVP 5140K manual Hardware Replacement Procedures, Replacing Management Module
Page 38 Page 40

DVP 5140K specifications

Transition Networks DVP 5140K is a robust device tailored for extending Ethernet networks over longer distances. This equipment stands out due to its reliability, high performance, and advanced features, making it a dependable choice for many organizations seeking to enhance their network capabilities.

One of the most notable features of the DVP 5140K is its support for Power over Ethernet (PoE). This technology allows the device to deliver both data and power to connected devices like IP cameras, wireless access points, and VoIP phones via a single Ethernet cable. The DVP 5140K supports various PoE standards, providing flexibility and ensuring compatibility with a wide range of PoE-enabled devices.

The DVP 5140K operates on an advanced switching architecture that allows it to handle a high volume of traffic without compromising performance. Its ability to process data at wire-speed ensures minimal latency and optimal throughput, which is essential for organizations that rely on real-time data transfer for operations. The device supports VLAN tagging, enabling users to create distinct network segments for improved security and performance.

Additionally, the device is designed with robust management features. It includes a web-based graphical user interface (GUI) that simplifies configuration and monitoring tasks. Network administrators can easily manage the device via SNMP (Simple Network Management Protocol), making it compatible with existing network management systems. The DVP 5140K also supports Quality of Service (QoS) settings, ensuring that critical applications receive the necessary bandwidth and prioritization.

Another significant characteristic of the DVP 5140K is its durability and suitability for various environments. The device is built with a metal chassis, providing resilience against physical impacts and environmental factors. It operates effectively in temperatures ranging from -40°C to 70°C, making it ideal for deployment in both indoor and outdoor settings.

In conclusion, Transition Networks DVP 5140K is a versatile and powerful networking solution combining PoE support, high-performance data processing, effective management tools, and durability. These features make it an excellent choice for organizations looking to expand their network infrastructure while ensuring reliability and efficiency in their operations. Whether for enterprise networks, public spaces, or industrial applications, the DVP 5140K meets the demands of modern networking with style and precision.