Cable Specifications
The physical characteristics of the media cable must meet or exceed IEEE 802.3 specifications.
Copper cables
Category 3: (minimum requirement) |
|
Gauge | 24 to 22 AWG |
Attenuation | 11.5 dB/100m @ |
Maximum cable distance: | 100 m |
Category 5: (recommended) |
|
Gauge | 24 to 22 AWG |
Attenuation | 22.0 dB/100m @ 100 MHz |
Maximum cable distance: | 100 m |
•
•Shielded (STP) or unshielded (UTP)
•Pins 1&2 and 3&6 are the two active pairs in an Ethernet network .
•
•Use only dedicated wire pairs for the active pins:
(e.g., blue/white & white/blue, orange/white & white/orange, etc.)
•Do not use flat or silver satin wire.
Troubleshooting
If the transceiver fails, determine the answer to the following questions:
1.Is the status LED flashing?
NO
•Verify that the AUI device is turned ON.
•Verify that the AUI cable from the transceiver to the AUI device port is installed properly.
•Contact Tech Support:
YES
•Go to step 2.
2.Is the RX LED flashing (receiving data)?
NO
•Is the LED ON Solid?
•Check twisted pair cable for proper connection
•Contact Tech Support:
Yes
Go to step 3.
3.Is the TX LED ON?
NO
•Check twisted pair cable for proper connection.
•Is the LED flashing (transmitting data)?
•Restart the hardware to force
•Contact Tech Support:
Yes
•Contact Tech Support:
Contact Us
Technical support
Technical support is available 24 hours a day.
US and Canada: | |
International: |
Transition now
Chat live via the Web with Transition Networks Technical Support. Log onto www.transition.com and click the Transition Now link.
Transition Networks provides seminars via live
Ask a question anytime by sending an
Address
Transition Networks: 10900 Red Circle Drive, Minnetonka MN 55343, U.S.A.
telephone:
| Declaration of Conformity |
Name of Mfg: | Transition Networks |
| 10900 Red Circle Drive, Minnetonka MN 55343 U.S.A. |
Model: | |
Part Number(s): | |
Regulation: | EMC Directive 89/336/EEC |
Purpose: To declare that the
EN55022:1998 + A1:2000 + A1:2003 EN 55024:1998 + A1:2000 + A2:2003
I, the undersigned, hereby declare that the equipment specified above conforms to the above Directive(s) and Standard(s).
| August, 2008_____ |
Stephen Anderson, | Date |
10 | techsupport@transition.com | 11 |