MICROSOFT WINDOWS 95 - SOFTWARE UPGRADE
1.Power up the computer, and start Windows 95.
2.The following instruction is to update the driver for LANart network card.
3.Update the driver for Transition Networks / LANart (EFA020X) - open the control panel by clicking "Start," then "Settings," then "Control Panel."
4.Double Click "system"
5.Click "Device Manager"
6.Double Click "Network Adapter"
7.Highlight "Transition Networks / LANart…." And , Click on "Properties"
8.Click on "Driver" and Click on "Update Driver"
9.Click on "Next" and choose - "No, Select Driver from List."
10.Click "Next" and Highlight Transition Networks / LANart EFA020X Adapter
11.Click "Have Disk" and insert the Transition Network Driver Disk (Disk1) For the NDIS3 MACdriver, type at the prompt:
"A:\Win95\Macs" and click "OK."
For the NDIS4 MINIPORT driver, type at the prompt:
"A:\Win95\Mini4" and click "OK."
12.Click "OK"
13.When prompted for the 95 CD
14.Click <OK> and type the correct path
15.Click <Close> and configure the Adapter
16.When the system comes up open Netowok Neighborhood by right clicking
17.Click on " Properties"
18.Highlight "Transition \ LANart …." And , Click on "Properties"
19.Click on Advance
20.Chose the properties as required by Network Administrator
21.Restart the computer. Your Transition Networks / LANart adapter is now configured. To access your network, protocols will need to be configured. Please see your network administrator for details.
6
