Copyright 2005, Avaya Inc.

All Rights Reserved

Notice

Every effort was made to ensure that the information in this document was complete and accurate at the time of printing. However, information is subject to change.

Warranty

Avaya Inc. provides a limited warranty on this product. Refer to your sales agreement to establish the terms of the limited warranty. In addition, Avaya’s standard warranty language as well as information regarding support for this product, while under warranty, is available through the following Web site: http://support.avaya.com.

Disclaimer

Avaya is not responsible for any modifications, additions or deletions to the original published version of this documentation unless such modifications, additions or deletions were performed by Avaya. Customer and/or End User agree to indemnify and hold harmless Avaya, Avaya's agents, servants and employees against all claims, lawsuits, demands and judgments arising out of, or in connection with, subsequent modifications, additions or deletions to this documentation to the extent made by the Customer or End User.

How to Get Help

For additional support telephone numbers, go to the Avaya support Web site: http://support.avaya.com. If you are:

•Within the United States, click the Escalation Management link. Then click the appropriate link for the type of support you need.

•Outside the United States, click the Escalation Management link. Then click the International Services link that includes telephone numbers for the international Centers of Excellence.

Standards Compliance

Avaya Inc. is not responsible for any radio or television interference caused by unauthorized modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by Avaya Inc. The correction of interference caused by such unauthorized modifications, substitution or attachment will be the responsibility of the user. Pursuant to Part 15 of the Federal Communications Commission (FCC) Rules, the user is cautioned that changes or modifications not expressly approved by Avaya Inc. could void the user’s authority to operate this equipment.

Product Safety Standards

This product complies with and conforms to the following international Product Safety standards as applicable:

Safety of Information Technology Equipment, IEC 60950, 3rd Edition, or IEC 60950-1, 1st Edition, including all relevant national deviations as listed in Compliance with IEC for Electrical Equipment (IECEE) CB-96A.

Safety of Information Technology Equipment, CAN/CSA-C22.2 No. 60950-00 / UL 60950, 3rd Edition, or CAN/CSA-C22.2 No. 60950-1-03 / UL 60950-1.

One or more of the following Mexican national standards, as applicable: NOM 001 SCFI 1993, NOM SCFI 016 1993, NOM 019 SCFI 1998.

The equipment described in this document may contain Class 1 LASER Device(s). These devices comply with the following standards:

•EN 60825-1, Edition 1.1, 1998-01

•21 CFR 1040.10 and CFR 1040.11.

The LASER devices used in Avaya equipment typically operate within the following parameters:

Typical Center Wavelength

Maximum Output Power

830 nm - 860 nm

-1.5 dBm

1270 nm - 1360 nm

-3.0 dBm

1540 nm - 1570 nm

5.0 dBm

Luokan 1 Laserlaite Klass 1 Laser Apparat

Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposures. Contact your Avaya representative for more laser product information.

Electromagnetic Compatibility (EMC) Standards

This product complies with and conforms to the following international EMC standards and all relevant national deviations:

Limits and Methods of Measurement of Radio Interference of Information Technology Equipment, CISPR 22:1997 and EN55022:1998.

Information Technology Equipment – Immunity Characteristics – Limits and Methods of Measurement, CISPR 24:1997 and EN55024:1998, including:

•Electrostatic Discharge (ESD) IEC 61000-4-2

•Radiated Immunity IEC 61000-4-3

•Electrical Fast Transient IEC 61000-4-4

•Lightning Effects IEC 61000-4-5

•Conducted Immunity IEC 61000-4-6

•Mains Frequency Magnetic Field IEC 61000-4-8

•Voltage Dips and Variations IEC 61000-4-11

Power Line Emissions, IEC 61000-3-2: Electromagnetic compatibility

(EMC) – Part 3-2: Limits – Limits for harmonic current emissions.

Power Line Emissions, IEC 61000-3-3: Electromagnetic compatibility

(EMC) – Part 3-3: Limits – Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems.

Federal Communications Commission Statement

Part 15:

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Canadian Department of Communications (DOC) Interference Information

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

European Union Declarations of Conformity

Avaya Inc. declares that the equipment specified in this document bearing the “CE” (Conformité Europeénne) mark conforms to the European Union Electromagnetic Compatibility Directive (89/336/EEC) and Low Voltage Directive (73/23/EEC).

Copies of these Declarations of Conformity (DoCs) can be obtained by contacting your local sales representative and are available on the following Web site: http://support.avaya.com.

Japan

This is a Class A product based on the standard of the Voluntary Control Council for Interference by Information Technology Equipment (VCCI). If this equipment is used in a domestic environment, radio disturbance may occur, in which case, the user may be required to take corrective actions.

To order copies of this and other documents:

Call: Avaya Publications Center

Voice 1.800.457.1235 or 1.207.866.6701 FAX 1.800.457.1764 or 1.207.626.7269

Write: Globalware Solutions 200 Ward Hill Avenue Haverhill, MA 01835 USA

Attention: Avaya Account Management

E-mail: totalware@gwsmail.com

For the most current versions of documentation, go to the Avaya support Web site: http://support.avaya.com.

Page 1 Page 3
Page 2
Image 2
Transition Networks P332MF quick start Nm 860 nm DBm Nm 1360 nm Nm 1570 nm
Page 1 Page 3

P332MF specifications

The Transition Networks P332MF is a robust networking solution designed to enhance the connectivity and flexibility of modern Ethernet networks. This media converter operates efficiently between fiber and copper, facilitating seamless data transfer across different media types. With its compact form factor, the P332MF is well-suited for various applications in enterprise, industrial, and telecommunications environments.

One of the key features of the P332MF is its ability to support both 10/100 Mbps Fast Ethernet and 1 Gbps networks. This versatility ensures compatibility with a wide range of devices, making it an ideal solution for upgrading existing systems without the need for extensive hardware replacements. The P332MF supports both automatic and manual configuration, allowing users to optimize performance according to their specific needs.

Another significant characteristic of the P332MF is its use of advanced technologies such as Auto-Negotiation, which automatically detects and selects the optimal speed and duplex mode for connected devices. This ensures efficient utilization of network resources and minimizes downtime. Additionally, the unit supports extensive diagnostic capabilities, including Link Fault Pass-Through and LED status indicators, which help in monitoring the network's operational health and quickly troubleshooting any issues that may arise.

The P332MF is also designed with temperature-resistant components, making it suitable for deployment in harsh environments. With a wide operating temperature range and rugged casing, it can perform reliably in outdoor applications or in industrial settings where conditions may vary significantly.

Moreover, the transition from copper to fiber connectivity helps in extending the reach of networks beyond conventional distances. The ability to cover long distances while maintaining data integrity is crucial for organizations looking to implement scalable networking solutions.

With its energy-efficient design, the P332MF contributes to lower operational costs, making it an environmentally friendly choice for businesses aiming to reduce their carbon footprint. In summary, the Transition Networks P332MF stands out as a versatile and reliable media converter, making it a valuable asset for any organization looking to enhance their networking infrastructure. Its combination of performance, reliability, and ease of use makes it a worthwhile investment for current and future networking needs.
Top Page Image Contents