Transition Networks SBFTF10XX-10X specifications User’s Guide, Stand Alone Media Converter

User’s Guide

SBFTF10xx-10x

Stand Alone Media Converter

•Copper to Fiber

•10/100 Bridging (2-Port)

•10/100Base-TX to 100Base-FX

The SBFTF10xx-10x 2-port Ethernet/fast Ethernet bridging media converter connects 10Base-T Ethernet or 100Base-TX fast Ethernet twisted-pair copper network devices to network devices on a

100Base-FX fast Ethernet fiber network.

Part Number	Port One - Copper	Port Two - Duplex Fiber-Optic
	10Base-T/100Base-TX 100Base-FX
SBFTF1011-100	RJ-45	ST, 1300 nm multimode
	100 m (328 ft)*	2 km (1.2 miles)*
SBFTF1013-100	RJ-45	SC, 1300 nm multimode
	100 m (328 ft)*	2 km (1.2 miles)*
SBFTF1014-100	RJ-45	SC, 1310 nm single mode
	100 m (328 ft)*	20 km (12.4 miles)*
SBFTF1015-100	RJ-45	SC, 1310 nm single mode
(long haul)	100 m (328 ft)*	40 km (24.8 miles)*
SBFTF1016-100	RJ-45	SC, 1310 nm single mode
(extra long haul)	100 m (328 ft)*	60 km (37.2 miles)*
SBFTF1017-100	RJ-45	SC, 1550 nm single mode
(long wave length)	100 m (328 ft)*	80 km (49.7 miles)*
SBFTF1018-100	RJ-45	MT-RJ, 1300 nm multimode
	100 m (328 ft)*	2 km (1.2 miles)*
SBFTF1019-100	RJ-45	LC, 1310 nm single mode
	100 m (328 ft)*	20 km (12.4 miles*

*Typical maximum cable distance. Actual distance is dependent upon the physical characteristics of the network installation.

The chassis version of the media converter is CBFTF10xx-10x. For more information, see the CBFTF10xx-10x user’s guide on- line at: www.transition.com.

Installation	.2
Operation	.6
Half-Duplex Network	.9
Cable Specifications	11
Technical Specifications	13
Troubleshooting	13
Compliance Information	15
Contact Us	16