Transition Networks SBFTF10XX-15X specifications User’s Guide, Stand-Alone Media Converter

User’s Guide

SBFTF10xx-15x

Stand-Alone Media Converter

•Copper to Fiber

•10/100 Bridging (2-Port)

•10Base-T/100Base-TX to 100Base-FX

The SBFTF10xx-15x 2-port Ethernet/Fast Ethernet bridging media converter connects 10Base-T Ethernet or 100Base-TX Fast Ethernet twisted-pair copper network devices to network devices on a 100Base-FX Fast Ethernet fiber network.

Part Number	Port One - Copper	Port Two - Duplex Fiber-Optic
	10Base-T/100Base-TX 100Base-FX
SBFTF1011-150	RJ-45	ST, 1300 nm multimode
	100 m (328 ft)*	2 km (1.2 miles)*
SBFTF1013-150	RJ-45	SC, 1300 nm multimode
	100 m (328 ft)*	2 km (1.2 miles)*
SBFTF1014-150	RJ-45	SC, 1310 nm single mode
	100 m (328 ft)*	20 km (12.4 miles)*
SBFTF1015-150	RJ-45	SC, 1310 nm single mode
	100 m (328 ft)*	40 km (24.8 miles)*
SBFTF1018-150	RJ-45	MT-RJ, 1300 nm multimode
	100 m (328 ft)*	2 km (1.2 miles)*
SBFTF1029-150**RJ-45		SC, 1310 mn (TX)/1550 nm (RX)
	100 m (328 ft)*	single mode, 20 km (12.4 miles)*
SBFTF1029-151** RJ-45		SC, 1550 mn (TX)/1310 nm (RX)
	100 m (328 ft)*	single mode, 20 km (12.4 miles)*
SBFTF1029-152*** RJ-45		SC, 1310 mn (TX)/1550 nm (RX)
	100 m (328 ft)*	single mode, 40 km (24.8 miles)*
SBFTF1029-153*** RJ-45		SC, 1550 mn (TX)/1310 nm (RX)
	100 m (328 ft)*	single mode, 40 km (24.8 miles)*

*Typical maximum cable distance. Actual distance is dependent upon the

	physical characteristics of the network. (TX) = transmit (RX) = receive
**	SBFTF1029-150and SBFTF1029-151 are intended to be installed in the same
	network where one is the local converter and the other is the remote
	converter.
		Installation	.2
***	SBFTF1029-152and SBFTF1029-153
		Operation	.5
	are intended to be installed in the
		Cable Specifications	.7
	same network where one is the local
		Technical Specifications	.9
	converter and the other is the remote
		Troubleshooting	10
	converter.
		Contact Us	11
		Compliance Information	12