SPS1872-xx
Installation -- Continued
SPS-1872-CC(Conversion Center™)
1.Remove the left-rear and right-rear screws from the Conversion Center™ media converter.
2.Connect the barrel connector on the SPS-1872-CC to the power port of
the media converter The flange of the SPS-1872-CC should slide over the rear of the media converter as the two devices are connected. The screw holes on the left and right sides should align.
3.Secure the two devices together by replacing the two screws on either side of the SPS-1872-CC.
TN Conversion Center media converter
SPS-1872-CC
SPS-1872-PS(PointSystem™)
1.Remove the left-rear and right-rear screws from the PointSystem™ media converter.
2.Connect the barrel connector on the SPS-1872-PS to the power port of the media converter. The flange of the SPS-1872-PS should slide over the rear of the media converter as the two devices are connected. The screw holes on the left and right sides should align.
3.Secure the two devices together by replacing the two screws on either side of the SPS-1872-PS.
TN PointSystem media converter
SPS-1872-PS
Installation -- Continued
SPS-1872-DPS(Dual PointSystem™)
1.Remove the left-rear and right-rear screws from the Dual PointSystem™ media converter.
2.Connect the barrel connector on the SPS-1872-DPS to the power port of the media converter. The flange of the SPS-1872-DPS should slide over the rear of the media converter as the two devices are connected. The screw holes on the left and right sides should align.
3.Secure the two devices together by replacing the two screws on either side of the SPS-1872-DPS.
TN Dual PointSystem
media converter
SPS-1872-DPS
