Transition Networks SSEFE10XX-10X specifications Part Number, Port Two Fiber Optic, SSEFE1012-100

User’s Guide

SSEFE10xx-10x

Stand-Alone Media Converter

•Switchable Ethernet and Fast Ethernet

•10 Mb/s Copper to Fiber

•100 Mb/s Copper to Fiber

Transition Networks SSEFE10xx-10x series Ethernet / Fast Ethernet media converter is a 10Mbps or 100Mbps switch-selectable media

converter. Both the copper and fiber links operate at the same speed setting via a hard set with a dip switch, so the media converter operates at either 10 Mb/s copper to fiber or 100 Mb/s copper to fiber.

Part Number	Port One - Twisted-Pair	Port Two - Fiber Optic
	Copper
SSEFE1012-100	RJ-45, 100 m (328 ft)*	ST, 1310 nm single mode
		duplex fiber, 20 km (12.4 miles)*
SSEFE1014-100	RJ-45, 100 m (328 ft)*	SC, 1310 nm single mode
		duplex fiber, 20 km (12.4 miles)*
SSEFE1015-100	RJ-45, 100 m (328 ft)*	SC, 1310 nm single mode
		duplex fiber, 40 km (24.8 miles)*
SSEFE1022-100	RJ-45, 100 m (328 ft)*	ST, 1310 nm single mode
		duplex fiber, 40 km (24.8 miles)*
SSEFE1029-100	RJ-45, 100 m (328 ft)*	SC, 1310 mn (TX)/1550 nm (RX)
		single fiber, 20 km (12.4 miles)*
SSEFE1029-101	RJ-45, 100 m (328 ft)*	SC, 1550 mn (TX)/1310 nm (RX)
		single fiber, 20 km (12.4 miles)*

*Typical maximum cable distance. Actual distance is dependent upon the physical characteristics of the network. (TX) = transmit, (RX) = receive

The SSEFE10xx-10x media converter is designed to be installed in pairs, where one is the local media converter and the other is the remote. For example, a local SSEFE1011-100 converter is connected, via fiber, to a remote SSEFE1011-100 converter.

For a single fiber network, a local SSEFE1029-100is connected, via fiber, to a remote SSEFE1029-101converter.

Installation	.2
Operation	.5
Cable Specifications	.6
Technical Specifications	.8
Troubleshooting	.9
Compliance Information	12