Project

Quantity

Item #

Model Specified:

 

CSI Section 11400

 

 

 

Specifications

Construction, Hardware and Insulation

Cabinet exterior front and louver assembly are constructed of 20 gauge stainless steel. Cabinet sides (including returns) and interior are constructed of anodized aluminum. The exterior cabinet top, back and bottom are constructed of heavy gauge aluminized steel. A set of four (4) 6" high casters are included.

Doors are equipped with removable plug cylinder locks and guaranteed for life cam- lift, gravity action, self-closing metal, glide hinges with stay open feature at 120 degrees. An exterior mounted switch is provided to operate the interior incandescent lighting. Each door includes a vertically mounted stainless steel handle.

Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal. Anti condensate heaters are located behind each door opening.

The cabinet is insulated with an average of 2" thick high density, non-CFC, foamed in place polyurethane.

DIMENSIONAL DATA

1-Section Models

2-Section Models

3-Section Models

Net capacity cu. ft.

24.2 (686 cu l)

46.0 (1303cu l)

69.1 (1958 cu l)

Length - overall in.

2978 (75.9 cm)

5218 (132.4 cm)

76516 (193.8 cm)

Depth - overall in.

35 (88.8 cm)

35 (88.8 cm)

35 (88.8 cm)

Depth - over body in.

32 (81.3 cm)

32 (81.3 cm)

32 (81.3 cm)

Depth - door open 90° in.

5678 (144.5 cm)

5678 (144.5 cm)

5678 (144.5 cm)

Clear door width in.

2118 (53.6 cm)

2118 (53.6 cm)

2118 (53.6 cm)

Clear half-door height in.

2712 (69.9 cm)

2712 (69.9 cm)

2712 (69.9 cm)

Clear full-door height in.

5758 (146.3 cm)

5758 (146.3 cm)

5758 (146.3 cm)

Height-overall on 6" casters

8314 (211.5 cm)

8314 (211.5 cm)

8314 (211.5 cm)

No. Standard Shelves

3

6

9

Shelf area sq. ft.1

18.8 (1.75 sq m)

34.6 (3.21 sq m)

51.9 (4.82 sq m)

ELECTRICAL DATA

 

 

 

Voltage

115/60/1

115/60/1

115/60/1

Feed wires with Ground

3

3

3

Full load amperes

7.3

12.0

15.0

REFRIGERATION DATA

 

 

 

Refrigerant

R-134a

R-134a

R-134a

BTU/HR H.P.2

2410 (13 HP)

4160 (12 HP)

5330 (34 HP)

SHIPPING DATA

 

 

 

Length - crated in.

35 (89 cm)

63 (160 cm)

91 (231 cm)

Depth - crated in.

43 (109 cm)

43 (109 cm)

43 (109 cm)

Height - crated in.

8312 (212 cm)

8312 (212 cm)

8312 (212 cm)

Volume - crated cu. ft.

71 (2011 cu l)

131 (3711 cu l)

189 (5354 cu l)

Net Wt. lbs.

305 (138 kg)

450 (204 kg)

720 (327 kg)

Gross Wt. lbs.

395 (179 kg)

590 (268 kg)

900 (408 kg)

NOTES

NOTE: Figures in parentheses reflect metric equivalents.

1= Figure shown reflects the area of standard shelf compliment plus the additional storage area available on the cabinet bottom.

2= Based on a 90 degree F ambient and 20 degree F evaporator. For remote data please refer to spec sheet 13-2.

Refrigeration System

Atop mounted, self-contained, balanced refrigeration system using R-134a refrigerant is conveniently located behind the one piece louver assembly. It features an easy to clean front facing condenser, thermostatic expansion valve, air-cooled hermetic compressor, large, high humidity evaporator coil located outside the food zone and a top mounted non-electric condensate evaporator. A 9' cord and plug is provided. Standard operating temperature is 34 to 38°F.

Controller

The easy to use water resistant microprocessor control system is supplied standard. It includes a 3-Digit LED Display, and a Fahrenheit or Celsius Temperature Scale Display Capability.

Interior

Standard interior arrangements include three (3) epoxy coated wire shelves per section, mounted on shelf pins, installed at the factory. Shelves are full-width, and do not have any large gaps between them requiring the use of "bridge" or "junior shelves." Recommended load limit per shelf should not exceed 225 lbs.

Warranties

Both a one year parts and labor warranty and a five year compressor warranty (self- contained models only) are provided standard. An optional 2nd year extended parts and labor warranty is also available.

Elevation

Elevation

Elevation

One-Section

Two-Section

Three-Section

Plan - One-SectionPlan - Two-Section

Equipped With One NEMA 5-15 P Plug (one & two section models only)

Equipped With One NEMA 5-20 P Plug (three section models only)

REQUIRED CLEARANCES

In order to assure optimum performance, the condensing unit MUST have an adequate supply of air for cooling purposes. Therefore, the operating location must either have a minimum of 12” clearance overhead of the condensing unit or allow for unrestricted air flow at the back of the unit. Clearance of at least 12” above is required in order to perform certain maintenance tasks.

NOTE: When ordering please specify: Voltage, Hinging, Door Size, Options and any

additional warranties.

 

Plan - Three-Section

Continued product development may necessitate specification changes without notice.

Part No. TR35789 (revised 6/08)

Section - All Models

 

SECTION

TRAULSEN

 

4401 BLUE MOUND RD.

FT. WORTH, TX 76106

4-3

PHONE 1 (800) 825-8220

FAX-MKTG. 1 (817) 624-4302

Website: www.traulsen.com

Page 2
Image 2
Traulsen G32000 warranty Specifications, Dimensional Data, Electrical Data, Refrigeration Data, Shipping Data

G32000 specifications

The Traulsen G32000 is a high-performance commercial refrigerator designed to meet the demanding needs of the food service industry. With its robust construction and advanced technology, the G32000 stands out as an excellent choice for restaurants, catering businesses, and food storage facilities.

One of the main features of the Traulsen G32000 is its generous storage capacity. This model typically offers multiple shelves, allowing for efficient organization of ingredients and food items. The spacious interior provides ample room for everything from large trays to bulk ingredients, making it an ideal solution for establishments that require extensive refrigeration space.

The G32000 is equipped with advanced refrigeration technology that ensures optimal temperature control. This model uses a state-of-the-art, balanced refrigeration system, which allows for uniform cooling throughout the cabinet. The temperature range can typically be set between 33°F and 41°F, offering reliable storage conditions for perishable items. The electronic controls and digital display also allow operators to easily monitor and adjust the settings.

Energy efficiency is another standout characteristic of the Traulsen G32000. This model is designed with environmentally friendly refrigerants and boasts a high Energy Star rating, making it a cost-effective option in terms of energy consumption. By reducing energy usage without sacrificing performance, the G32000 helps businesses save on utility costs while minimizing their environmental footprint.

Durability is a key element in the design of the Traulsen G32000. Constructed with stainless steel, both inside and out, this refrigerator is built to withstand heavy use in busy commercial kitchens. The materials are resistant to corrosion, dents, and scratches, ensuring that the unit maintains its professional appearance over time. Additionally, the gaskets are designed to create an airtight seal, promoting energy efficiency and maintaining optimal temperature levels.

The user-friendly design of the G32000 includes features such as easy-to-clean surfaces and adjustable shelving. These elements simplify routine maintenance, making it easier for staff to keep the unit clean and organized. Furthermore, the refrigerator often comes with options for customized configurations, allowing businesses to tailor the unit to their specific needs.

In summary, the Traulsen G32000 combines capacity, efficiency, and durability to meet the rigorous demands of the food service industry. With its advanced refrigeration technology, energy-saving features, and robust construction, it is a reliable choice for any commercial kitchen looking to enhance their food storage and preservation capabilities.