Project

Quantity

Item #

Model Specified:

 

CSI Section 11400

 

 

 

Specifications

Construction, Hardware and Insulation

Cabinet exterior front, one piece sides, louver assembly and doors are constructed of 20 gauge stainless steel with #4 finish. Cabinet interior and door liners are constructed of stainless steel (anodized aluminum in the A-Series). The exterior cabinet top and bottom are constructed of heavy gauge aluminized steel. A set of four (4) adjustable 6" high stainless steel legs are included.

Doors are equipped with a gasket protecting metal door pan, removable plug cylinder locks and guaranteed for life cam-lift, gravity action, self-closing metal, glide hinges with stay open feature at 120 degrees. Hinges include a concealed switch to automatically activate the interior incandescent lighting. Guaranteed for life, work flow door handles are mounted horizontally over recess in door which limits protrusion from door face into aisleways. Doors have seamless, polished metal corners.

Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal. Anti condensate heaters are located behind each door opening.

Both the cabinet and door(s) are insulated with an average of 2" thick high density, non-CFC, foamed in place polyurethane.

DIMENSIONAL DATA

R/AHT132WPUT

R/AHT232WPUT

R/AHT332WPUT

Net capacity cu. ft.

25.2 (714 cu l)

54.2 (1535 cu l)

83.2 (2357 cu l)

 

 

 

 

Length - overall in.

297⁄8 (75.9 cm)

58 (147.3 cm)

861⁄8 (218.8 cm)

Depth - overall in.

3715⁄16 (96.4 cm)

3715⁄16 (96.4 cm)

3715⁄16 (96.4 cm)

Depth - over body in.

32 (81.3 cm)

32 (81.3 cm)

32 (81.3 cm)

Depth - doors open 90° in.

833⁄8 (211.8cm)

833⁄8 (211.8cm)

833⁄8 (211.8cm)

Clear door width in.

211⁄8 (53.6 cm)

211⁄8 (53.6 cm)

211⁄8 (53.6 cm)

Clear half-door height in.

271⁄2 (69.9 cm)

271⁄2 (69.9 cm)

271⁄2 (69.9 cm)

Clear full-door height in.

575⁄8 (146.3 cm)

575⁄8 (146.3 cm)

575⁄8 (146.3 cm)

Height - overall on 6" legs

831⁄4 (211.5 cm)

831⁄4 (211.5 cm)

831⁄4 (211.5 cm)

RHT Net Wt. lbs.

405 (184 kg)

685 (311kg)

965 (438 kg)

 

 

 

 

AHT Net Wt. lbs.

355 (161 kg)

605 (274 kg)

845 (383 kg)

No. Standard Shelves

3

6

9

Shelf area sq. ft.1

18.8 (1.75 sq m)

37.6 (3.49 sq m)

56.4 (5.23 sq m)

ELECTRICAL DATA

 

 

 

Voltage

115/60/1

115/60/1

115/60/1

 

 

 

 

Feed wires with Ground

3

3

3

 

 

 

 

Full load amperes

8.3

11.0

11.9

 

 

 

 

REFRIGERATION DATA

 

 

 

Refrigerant

R-134a

R-134a

R-134a

BTU/HR H.P.2

2220 (1⁄3 HP)

4200 (1⁄2 HP)

4200 (1⁄2 HP)

NOTES

NOTE: Figures in parentheses reflect metric equivalents.

1= Area of standard shelf compliment only, does not include storage area of additional shelves or available on cabinet bottom.

2= Based on a 90 degree F ambient and 20 degree F evaporator.

3= For approximate remote weights deduct 40 lbs. from respective net or gross weight. For other information on remote models, please refer to spec sheet 12-2.

Equipped With One NEMA 5-15 P Plug

NOTE: Full load amps and plug style may vary depending on electrical options chosen and condensing unit employed.

Refrigeration System

Atop mounted, self-contained, balanced refrigeration system using R-134a refrigerant is conveniently located behind the one piece louver assembly. It features an easy to clean front facing condenser, thermostatic expansion valve, air-cooled hermetic compressor, plenum effect blower coil, large, high humidity evaporator coil located outside the food zone and a top mounted non-electric condensate evaporator. Biased return air duct protects against introduction of warm kitchen air, promoting even temperature maintenance and efficient operation. A 9' cord and plug is provided. Standard operating temperature is 34 to 38°F.

Controller

The easy to use water resistant INTELA-TRAUL®microprocessor control system is supplied standard. Unit is NAFEM Data Protocol communication (NDP) ready. Optional hardware required to be NDP compliant. Third party software required for network connection. It includes a 3-Digit LED Display, Fahrenheit or Celsius Temperature Scale Display Capability, and an RS485 data port. In addition it includes audio/visual alarms for: Hi/Lo Cabinet Temperature, Door Open, Clean Condenser, Evaporator Coil and Discharge Line Sensor Failures, and Power Supply Interruption.

Interior

Standard interior arrangements include three (3) chrome plated wire shelves per section, mounted on shelf pins. Shelves are full-width, and do not have any large gaps between them requiring the use of "bridge" or "junior shelves." Recommended load limit per shelf should not exceed 225 lbs. Optional tray slides may be purchased in combination with, or in lieu of these. Both standard and optional interior arrangements are completely installed at the factory.

Warranties

Both a one year parts and labor warranty and a five year compressor warranty (self- contained models only) are provided standard. An optional 2nd year extended parts and labor warranty is also available. In addition the INTELA-TRAUL®control is warranted by a two year parts and labor warranty.

Elevation -

R/AHT232WPUT

Elevation -

Elevation -

R/AHT132WPUT

R/AHT332WPUT

Plan - R/AHT232WPUT

Plan - R/AHT132WPUT

NOTE: When ordering please specify: Voltage, Hinging, Door Size, Options and any additional warranties.

Continued product development may necessitate specification changes without notice.

Part No. TR35759 (revised 1/07)

Plan - R/AHT332WPUT

Section - All Models

 

 

 

 

 

SECTION

TRAULSEN

 

 

 

4401 BLUE MOUND RD.

FT. WORTH, TX 76106

 

 

1-5

PHONE 1 (800) 825-8220

FAX-MKTG. 1 (817) 624-4302

 

 

 

Website: www.traulsen.com

 

 

 

 

 

 

 

 

Page 1
Page 2
Image 2
Traulsen RHT132WPUT-FHS warranty Specifications, Dimensional Data, AHT332WPUT, Electrical Data, Refrigeration Data
Page 1

RHT132WPUT-FHS specifications

The Traulsen RHT132WPUT-FHS is a top-tier refrigeration unit designed for commercial kitchens, ensuring food safety and efficiency. This upright refrigerator is an ideal solution for restaurants, caterers, and food service establishments that require reliable and spacious storage for perishable items.

One of the standout features of the Traulsen RHT132WPUT-FHS is its impressive capacity. With ample storage space, it can accommodate a significant amount of food products while maintaining optimal organization. The unit offers adjustable shelves, allowing users to customize the interior layout to meet specific storage needs. This flexibility is essential for maximizing space efficiency in a busy kitchen environment.

The RHT132WPUT-FHS utilizes advanced refrigeration technology designed for consistency and accuracy. Its state-of-the-art digital control system ensures precise temperature regulation, keeping food at safe serving levels between 33°F and 41°F. This feature is critical for maintaining food quality and adhering to health regulations, allowing operators to serve fresh, safe meals to customers.

Energy efficiency is another highlight of the Traulsen RHT132WPUT-FHS. Built with environmentally-friendly refrigerants, the unit is designed to minimize energy consumption without sacrificing performance. This not only helps reduce operating costs but also supports sustainability efforts, making it a responsible choice for eco-conscious operators.

In terms of construction, the RHT132WPUT-FHS is built with durability in mind. It features a stainless steel exterior and an aluminum interior, providing resistance to corrosion and wear, which is essential in demanding kitchen environments. The heavy-duty doors are designed for durability and efficiency, equipped with microprocessor controls for ease of use.

The unit also boasts an ergonomic design with self-closing doors, ensuring that the interior temperature remains stable, thus maintaining food safety. The doors come with a stay-open feature, making loading and unloading more convenient during peak operational times.

Additional features include an easy-to-read display for temperature monitoring, a thorough airflow design for even cooling, and an efficient evaporator system that reduces frosting and maintenance needs. Overall, the Traulsen RHT132WPUT-FHS stands out as a reliable, efficient, and user-friendly refrigeration solution, making it an excellent investment for any food service operation.
Top Page Image Contents