TravRoute Pocket PC 5 manual Software Activation, Deactivation and Licence Update, Speech Volume

Software Activation

NOTE: CoPilot won’t open on your Pocket PC unless map data has previously been downloaded from CoPilot on the desktop.

To launch CoPilot, first turn on your Pocket PC, attach the GPS receiver, and insert your QuickStart card (if provided). Tap Start on your Pocket PC and choose CoPilot from the drop-down menu.

If You Are Using a CoPilot GPS or Quick Start Card:

You will be prompted to enter your Product Key Code on your Pocket PC (it can be found on the front cover of the Quick Start at the front of this manual). Enter your Product Key Code and then configure your GPS receiver (you can tap Tutorial in the Welcome screen for a Wizard to guide you).

You must activate your CoPilot software in order to use it. The first time you open CoPilot on your Pocket PC, the Activate screen will appear and you will be asked to activate the software.

For Automatic Activation, follow the on-screen instructions:

1.Synchronize your Pocket PC with your desktop/laptop computer via ActiveSync.

2.Connect your desktop/laptop to the Internet.

3.Tap Next when ready and enter your e-mail address when prompted. CoPilot will be activated within a few seconds. Tap Next to begin using CoPilot.

4.Select your desired map region (see Step 6 in the Quick Start at the front of this manual) and then configure your GPS receiver (you can tap Tutorial in the Welcome screen for a Wizard to guide you).

If you are unable to synchronize your Pocket PC with your desktop/laptop but have internet access, you can Activate Manually as follows:

1.On your Pocket PC, check Activate Manually and tap Next.

2.Enter your Product Key Code (see Quick Start front cover) where indicated and tap Next. Your Licence Number will be displayed.

3.On your desktop/laptop, connect to the internet and browse to http://activate.alk.com. Type in your Product Key Code, Licence Number, and E-mail Address where indicated and click Submit. Your Activation Code will immediately be e-mailed to you.

4.On your Pocket PC, type in your Activation Code where indicated and tap Activate. CoPilot will launch upon activation.

5.Select your desired map region (see Step 6 in the Quick Start at the front of this manual) and then configure your GPS receiver (you can tap Tutorial in the Welcome screen for a Wizard to guide you).

Deactivation and Licence Update

The CoPilot desktop software contains street-level maps for all of Europe, and CoPilot is offered with different licences that allow you to use some or all of these maps on your Pocket PC. Licences are available for the following:

(1)Single region - Detailed street-level maps for any of the following regions: Alps Ski Region, Benelux (Belgium, the Netherlands, and Luxembourg), France, Germany, Italy, Pyrenees, Scandinavia, and the United Kingdom.

(2)Pan-Europe- Complete street-level maps for all of Europe.

After purchasing the licence, go to CoPilot's Tools menu, select Update Licence/ Activate, and input your new activation code. The CoPilot desktop software already contains complete European maps, which can now be down- loaded to your Pocket PC for in-vehicle use. If you purchased CoPilot with a sin- gle region licence and later want to use street maps from other regions, you will need to purchase an update licence from your dealer.

Speech Volume

To hear CoPilot’s voice prompts, the volume on your Pocket PC must be turned all the way up. In the Pocket PC Start menu, go to Settings and tap on Sounds and Notifications. Under System Volume, move the slide bar all the way to the right. Or use your Pocket PC’s keypad when CoPilot is open: tap up until you reach the maximum volume.

If you installed the TTS (text to speech) voice option, you may also want to make sure the “Amplify Speech Volume” option is on — tap the Tools menu (if you don’t see it, tap at the top or bottom of the screen), select Options, and tap the Guidance tab. This option should be checked.

- 11 - - 12 -