F L Y C A S E
P R O
E X T E R N A L S T O R A G E P E R I P H E R A L S
w w w. p i k a o n e . c o m 15
S O F T WA R E
I N S TA L L AT I O N
CHOOSI NG TH E DES TINAT I O N
To choose the destination of the backup, simply use the "Des-
tination " drop-down menu, which lists all the FlyCASEs connec-
ted to your PC
STA RTING THE BACKU P
B e f o re doing anything else, make sure the destination FlyCASE
has enough disk space to back up the contents of your sourc e .
If it does not, yo ur backup will be i nterrupted and fil e copy
e rrors will appear in the INFO file available in the dire c t o ry of
the backup made to your FlyCASE. You can also access this file
using the “Info” butto n available on the Pika FORMAT main
screen.
Click on the "New backup" button.
A full copy of the “Source” is made on your FlyCASE during
the first backup.This may take time.
During subsequent backups, only modified files in the source
will be backed up, considerably reducing backup time.
FINDIN G OUT ABOU T THE PROG RESS OF A BACKU P
When a source that has already been backed up in the curre n t
destination is selected, the date and its last status are displayed
automatically.
A backup can have one of the following statuses:
GREY:No backup was made in the selected destination;
RED: The backup was interrupted, ei ther by the user, or because of
an error;
YELLOW:Backup was completed but some files were not copied;
GREEN: Operation successful. All files were backed up.
M o re information is available. To access this information, sim-
ply click on the "Info" button.
"Destination " drop-down menu
The quantity of directories and files copied
Indicates time spentand remaining
Status of the last backup Infos
Date of the lastbackup
The arrow fills up andempties during backup
New backup"