F L Y C A S E
P R O
E X T E R N A L S T O R A G E P E R I P H E R A L S
w w w. p i k a o n e . c o m 8
H A R D WA R E
I N S TA L L AT I O N
REMARK
Your FlyCASE PRO has 2 Fire Wi re 800 connectors. The second connec-
tor allows you to chai n another Fire Wi re perip heral, which will be
recognized by the same computer.
•
S TA RT- UP P RO CE DU RE
CAUTION
B e f o re starting the installation pro c e d u re, refer to appendices, to learn
about the limitations and possibilities that Fire Wi re int erface off e r
you. Also refer to paragraph (minimum re q u i remens page 6) and check
whether your whole system meets the required configurations.
1. Connect the external power supply supplied with your Fly-
CASE PRO on the rear Power Supply connector of the FlyCASE
PRO and the other end to the wall outlet.
2.Connect your computer to the wall outlet.
3.Power On your computer.
4 . Switch On your FlyCASE PRO (On/Off switch at the rear of
the FlyCASE PRO).
5 .Connect one end of the selected Fire Wi re cable to your Fly-
CASE PRO and the other end to the Fire Wi re port of your com-
puter. A few examples are given hereafter.
6 .After a few moments, the "Power On" light of your FlyCASE
PRO will shine a continuous blue. Your computer is now re a d y
to detect your FlyCASE PRO. To finish installing your FlyCASE
PRO refer to the next chapter.
Connecting a Mac equipped with a FireWire 400.
Connecting a MAC equipped with a FireWire 800.Connecting a PC equipped with a Mini FireWire.