The Network Cable Tester comes in two modular units, a master unit and a remote terminator. The modular design enables the tester to be used for local loop-back test of a patch cable or remote testing of pre-installed premise wiring. The Network Cable Tester verifies continuity of individual wires and identifies open, shorted and cross-connected wires. It comes with shielded connectors, which enables the testing of shielded twisted pair (STP) cables. It also features the convenient Auto Scanning and Manual Scanning modes. Furthermore, a tone generator is also included and individual pins/wires can be selected to carrying a tone that can be picked up with Net Probe or any tone probe for you easily locate cables. This tester is a perfect companion to any Network professional.
The Network Cable Tester comes complete with BNC to RJ45 adapters for testing of coax BNC network and a RJ45 to RJ45 patch cord for testing patch panel and RJ45 network wall plates. Everything comes packaged in a convenient carrying pouch. Other optional adapters such as, RJ45 to USB A/B, 1394 6 pin, RJ45 to 1394 4 pin and F to BNC can be added to expand the Network Cable Tester functionality.
