TRENDnet TE100-P21 manual For MAC OS 9 User

For MAC OS 9 User

If you use MAC OS 9, you can use the AppleTalk network protocol for network communications over standard Ethernet or Fast Ethernet using the EtherTalk transport, or over a proprietary low-speed LocalTalk transport. Your print server can be used for network printing to PostScript printers. You can print from any MAC OS computer connected to your Ethernet network, either directly using an EtherTalk connection or indirectly through a LocalTalk-to-EtherTalk router.

To set up the print server to be used for AppleTalk printing:

1.Please confirm that the AppleTalk protocol is enabled in your Macintosh computer.

2.Change the IP Address on one of the computers within your network to 192.168.0.x (where x is any number between 2-254).

3.Type 192.168.0.1 (the default IP Address) into the address field of your browser.

4.Select the Network tab and scroll to the AppleTalk protocol section.

5.If your AppleTalk network is divided into AppleTalk zones, you have to specify which zone the Print Server should be in. You should locate the print server in the same zone as most of the users who will be using it. If your network is not divided into zones, it should contain a single asterisk “*”.

- 102 -